usb flash disk - nenalezen v midnight commander , tuxcommander (VYŘEŠENO)

ve složce media nenajdu žádný USB -disk. Jak na to. Děkuji

zkus

sudo blkid 

pak třeba

lsusb

před zapojením a po zapojení

Po zapojení se podívat na

dmesg

nebo

sudo less /var/log/messages 

A hledat informace o flashce.

Stále nic. Caja - najde vše ,ale v midnight commander , tuxcommander - NIC. Když se podívam v MC a tuxcmd na /dev/disk/by-label/ USB-15GB tak USB flash disk tam je. V Caja jsem dal vlastnosti USB-disku . Typ: Odkaz na blokované zařízení (inode/blockdevice)

[radek@localhost ~]$ sudo blkid
[sudo] password for radek:
radek is not in the sudoers file. This incident will be reported.
[radek@localhost ~]$ lsusb
Bus 002 Device 002: ID 03f0:002a Hewlett-Packard LaserJet P1102
Bus 002 Device 004: ID 0951:1665 Kingston Technology
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 041e:4083 Creative Technology, Ltd Live! Cam Socialize [VF0640]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[radek@localhost ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.6-300.fc20.x86_64 (mockbuild@bkernel02) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #1 SMP Mon Dec 23 16:44:31 UTC 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.12.6-300.fc20.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root rhgb quiet LANG=cs_CZ.UTF-8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000befb1cff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000befb1d00-0x00000000befb3cff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000befb3d00-0x00000000bf7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq dc7700 Ultra-slim Desktop/0A5Ch, BIOS 786E1 v01.10 04/13/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbefb1 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BF000000 mask FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02017000, 0x02017fff] PGTABLE
[ 0.000000] BRK [0x02018000, 0x02018fff] PGTABLE
[ 0.000000] BRK [0x02019000, 0x02019fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbec00000-0xbedfffff]
[ 0.000000] [mem 0xbec00000-0xbedfffff] page 2M
[ 0.000000] BRK [0x0201a000, 0x0201afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbc000000-0xbebfffff]
[ 0.000000] [mem 0xbc000000-0xbebfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff]
[ 0.000000] [mem 0x80000000-0xbbffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xbee00000-0xbefb0fff]
[ 0.000000] [mem 0xbee00000-0xbefb0fff] page 4k
[ 0.000000] BRK [0x0201b000, 0x0201bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x369bc000-0x374d5fff]
[ 0.000000] ACPI: RSDP 00000000000e7610 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 00000000befc3d40 0003C (v01 HPQOEM SLIC-BPC 20070413 00000000)
[ 0.000000] ACPI: FACP 00000000befc3de8 00074 (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: DSDT 00000000befc4143 09522 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000befc3d00 00040
[ 0.000000] ACPI: APIC 00000000befc3e5c 00068 (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: ASF! 00000000befc3ec4 00063 (v32 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: MCFG 00000000befc3f27 0003C (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: TCPA 00000000befc3f63 00032 (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: HPET 00000000befc410b 00038 (v01 COMPAQ BROADH2O 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000befb0fff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbefb0fff]
[ 0.000000] NODE_DATA [mem 0xbef9d000-0xbefb0fff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bb400000-ffff8800be3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbefb0fff]
[ 0.000000] On node 0 totalpages: 782159
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12159 pages used for memmap
[ 0.000000] DMA32 zone: 778161 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.000000] e820: [mem 0xbf800000-0xf3ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:1024 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800bea00000 s86784 r8192 d23808 u1048576
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 769915
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.12.6-300.fc20.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root rhgb quiet LANG=cs_CZ.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture…
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3051064K/3128636K available (6616K kernel code, 1040K rwdata, 2932K rodata, 1444K init, 1664K bss, 77572K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:65792 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try ‘cgroup_disable=memory’ option if you don’t want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2793.220 MHz processor
[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency… 5586.44 BogoMIPS (lpj=2793220)
[ 0.001011] pid_max: default: 32768 minimum: 301
[ 0.001066] Security Framework initialized
[ 0.001080] SELinux: Initializing.
[ 0.001098] SELinux: Starting in permissive mode
[ 0.002662] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006428] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008160] Mount-cache hash table entries: 256
[ 0.008574] Initializing cgroup subsys memory
[ 0.008605] Initializing cgroup subsys devices
[ 0.008610] Initializing cgroup subsys freezer
[ 0.008613] Initializing cgroup subsys net_cls
[ 0.008616] Initializing cgroup subsys blkio
[ 0.008620] Initializing cgroup subsys perf_event
[ 0.008624] Initializing cgroup subsys hugetlb
[ 0.008673] CPU: Physical Processor ID: 0
[ 0.008676] CPU: Processor Core ID: 0
[ 0.008679] mce: CPU supports 4 MCE banks
[ 0.008695] CPU0: Thermal monitoring enabled (TM1)
[ 0.008707] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
[ 0.008811] Freeing SMP alternatives memory: 24K (ffffffff81e6f000 - ffffffff81e75000)
[ 0.010505] ACPI: Core revision 20130725
[ 0.014108] ACPI: All ACPI Tables successfully acquired
[ 0.015017] ftrace: allocating 25431 entries in 100 pages
[ 0.025490] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.036060] smpboot: CPU0: Intel® Pentium® D CPU 2.80GHz (fam: 0f, model: 06, stepping: 05)
[ 0.037000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.037000] … version: 0
[ 0.037000] … bit width: 40
[ 0.037000] … generic registers: 18
[ 0.037000] … value mask: 000000ffffffffff
[ 0.037000] … max period: 0000007fffffffff
[ 0.037000] … fixed-purpose events: 0
[ 0.037000] … event mask: 000000000003ffff
[ 0.038246] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.038397] smpboot: Booting Node 0, Processors # 1 OK
[ 0.050054] Brought up 2 CPUs
[ 0.050060] smpboot: Total of 2 processors activated (11172.88 BogoMIPS)
[ 0.051219] devtmpfs: initialized
[ 0.052140] PM: Registering ACPI NVS region [mem 0xbefb1d00-0xbefb3cff] (8192 bytes)
[ 0.052140] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots.
[ 0.053692] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.053696] pinctrl core: initialized pinctrl subsystem
[ 0.053754] RTC time: 11:59:29, date: 01/14/14
[ 0.053824] NET: Registered protocol family 16
[ 0.053992] cpuidle: using governor menu
[ 0.054093] ACPI: bus type PCI registered
[ 0.054098] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.054188] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.054194] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.059646] PCI: Using configuration type 1 for base access
[ 0.061339] bio: create slab at 0
[ 0.061339] ACPI: Added _OSI(Module Device)
[ 0.061339] ACPI: Added _OSI(Processor Device)
[ 0.061339] ACPI: Added OSI(3.0 SCP Extensions)
[ 0.061339] ACPI: Added OSI(Processor Aggregator Device)
[ 0.063026] ACPI: EC: Look up EC in DSDT
[ 0.071071] ACPI: SSDT 00000000befce637 00320 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.071460] ACPI: Dynamic OEM Table Load:
[ 0.071466] ACPI: SSDT (null) 00320 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.080257] ACPI: Interpreter enabled
[ 0.080272] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S1
] (20130725/hwxface-571)
[ 0.080280] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S2
] (20130725/hwxface-571)
[ 0.080304] ACPI: (supports S0 S3 S4 S5)
[ 0.080308] ACPI: Using IOAPIC for interrupt routing
[ 0.080348] PCI: Ignoring host bridge windows from ACPI; if necessary, use “pci=use_crs” and report a bug
[ 0.080494] ACPI: No dock devices found.
[ 0.092232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.092247] ACPI BIOS Error (bug): _SB
.PCI0.OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20130725/nsarguments-189)
[ 0.092340] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130725/dsfield-211)
[ 0.092350] ACPI Error: Method parse/execution failed [_SB
.PCI0._OSC] (Node ffff8800ba241c30), AE_ALREADY_EXISTS (20130725/psparse-536)
[ 0.092361] ACPI: Marking method OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.092379] ACPI BIOS Error (bug): _SB
.PCI0.OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20130725/nsarguments-189)
[ 0.092465] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130725/dsfield-211)
[ 0.092474] ACPI Error: Method parse/execution failed [_SB
.PCI0._OSC] (Node ffff8800ba241c30), AE_ALREADY_EXISTS (20130725/psparse-536)
[ 0.092490] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.092495] acpi PNP0A08:00: Unable to request _OSC control (OSC support mask: 0x08)
[ 0.092960] acpi PNP0A08:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
[ 0.092966] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.092970] acpi PNP0A08:00: host bridge window [io 0x1000-0x2fff] (ignored)
[ 0.092973] acpi PNP0A08:00: host bridge window [io 0x3000-0x6fff] (ignored)
[ 0.092977] acpi PNP0A08:00: host bridge window [io 0x7000-0xafff] (ignored)
[ 0.092980] acpi PNP0A08:00: host bridge window [io 0xb000-0xffff] (ignored)
[ 0.092984] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.092988] acpi PNP0A08:00: host bridge window [mem 0xbf800000-0xf3ffffff] (ignored)
[ 0.092991] PCI: root bus 00: using default resources
[ 0.092997] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.093159] ACPI: _SB
.PCI0.LNKA: can’t evaluate ADR (0x5)
[ 0.093165] ACPI: _SB
.PCI0.LNKB: can’t evaluate ADR (0x5)
[ 0.093170] ACPI: _SB
.PCI0.LNKC: can’t evaluate ADR (0x5)
[ 0.093174] ACPI: _SB
.PCI0.LNKD: can’t evaluate ADR (0x5)
[ 0.093178] ACPI: _SB
.PCI0.LNKE: can’t evaluate ADR (0x5)
[ 0.093182] ACPI: _SB
.PCI0.LNKF: can’t evaluate ADR (0x5)
[ 0.093187] ACPI: _SB
.PCI0.LNKG: can’t evaluate ADR (0x5)
[ 0.093191] ACPI: _SB
.PCI0.LNKH: can’t evaluate ADR (0x5)
[ 0.093298] ACPI: _SB
.PCI0.SBD1: can’t evaluate ADR (0x5)
[ 0.093303] ACPI: _SB
.PCI0.SBD2: can’t evaluate ADR (0x5)
[ 0.093307] ACPI: _SB
.PCI0.SBD3: can’t evaluate _ADR (0x5)
[ 0.093327] PCI host bridge to bus 0000:00
[ 0.093333] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.093337] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.093340] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.093354] pci 0000:00:00.0: [8086:2990] type 00 class 0x060000
[ 0.093516] pci 0000:00:02.0: [8086:2992] type 00 class 0x030000
[ 0.093535] pci 0000:00:02.0: reg 0x10: [mem 0xf0400000-0xf04fffff]
[ 0.093551] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.093560] pci 0000:00:02.0: reg 0x20: [io 0x1100-0x1107]
[ 0.093710] pci 0000:00:03.0: [8086:2994] type 00 class 0x078000
[ 0.093731] pci 0000:00:03.0: reg 0x10: [mem 0xf0525900-0xf052590f 64bit]
[ 0.093790] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.093946] pci 0000:00:19.0: [8086:104a] type 00 class 0x020000
[ 0.093967] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
[ 0.093978] pci 0000:00:19.0: reg 0x14: [mem 0xf0524000-0xf0524fff]
[ 0.093989] pci 0000:00:19.0: reg 0x18: [io 0x1000-0x101f]
[ 0.094062] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.094147] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.094206] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.094253] pci 0000:00:1a.0: reg 0x20: [io 0x1020-0x103f]
[ 0.094351] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.094411] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.094458] pci 0000:00:1a.1: reg 0x20: [io 0x1040-0x105f]
[ 0.094556] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.094631] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.094654] pci 0000:00:1a.7: reg 0x10: [mem 0xf0525000-0xf05253ff]
[ 0.094748] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.094829] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.094891] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.094911] pci 0000:00:1b.0: reg 0x10: [mem 0xf0520000-0xf0523fff 64bit]
[ 0.094990] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.095124] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.095207] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.095295] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.095356] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.095403] pci 0000:00:1d.0: reg 0x20: [io 0x1060-0x107f]
[ 0.095501] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.095554] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.095601] pci 0000:00:1d.1: reg 0x20: [io 0x1080-0x109f]
[ 0.095699] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.095764] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.095788] pci 0000:00:1d.7: reg 0x10: [mem 0xf0525400-0xf05257ff]
[ 0.095881] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.095962] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.096029] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.096160] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.096223] pci 0000:00:1f.0: [8086:2814] type 00 class 0x060100
[ 0.096312] pci 0000:00:1f.0: address space collision: [io 0xf800-0xf87f] conflicts with ACPI CPU throttle [??? 0x0000f810-0x0000f815 flags 0x80000000]
[ 0.096322] pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
[ 0.096328] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[ 0.096333] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[ 0.096338] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[ 0.096490] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018a
[ 0.096508] pci 0000:00:1f.2: reg 0x10: [io 0x1108-0x110f]
[ 0.096519] pci 0000:00:1f.2: reg 0x14: [io 0x1118-0x111b]
[ 0.096529] pci 0000:00:1f.2: reg 0x18: [io 0x1110-0x1117]
[ 0.096539] pci 0000:00:1f.2: reg 0x1c: [io 0x111c-0x111f]
[ 0.096550] pci 0000:00:1f.2: reg 0x20: [io 0x10e0-0x10ef]
[ 0.096560] pci 0000:00:1f.2: reg 0x24: [io 0x10f0-0x10ff]
[ 0.096596] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.096807] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.096916] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.096929] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.096933] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.097332] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.097454] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.097573] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.097691] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.097808] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.097926] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.098052] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.098169] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.098594] ACPI: Enabled 1 GPEs in block 00 to 1F

[ 0.098606] ACPI: _SB_.PCI0: notify handler is installed
[ 0.098654] Found 1 acpi root devices
[ 0.098754] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.098754] vgaarb: loaded
[ 0.098754] vgaarb: bridge control possible 0000:00:02.0
[ 0.098754] SCSI subsystem initialized
[ 0.099029] libata version 3.00 loaded.
[ 0.099069] ACPI: bus type USB registered
[ 0.099111] usbcore: registered new interface driver usbfs
[ 0.099127] usbcore: registered new interface driver hub
[ 0.099151] usbcore: registered new device driver usb
[ 0.099151] PCI: Using ACPI for IRQ routing
[ 0.101031] PCI: pci_cache_line_size set to 64 bytes
[ 0.101078] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.101082] e820: reserve RAM buffer [mem 0xbefb1d00-0xbfffffff]
[ 0.101238] NetLabel: Initializing
[ 0.101242] NetLabel: domain hash size = 128
[ 0.101244] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.101263] NetLabel: unlabeled traffic allowed by default
[ 0.101337] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.101343] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.101350] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.103060] Switched to clocksource hpet
[ 0.116326] pnp: PnP ACPI init
[ 0.116353] ACPI: bus type PNP registered
[ 0.116457] pnp 00:00: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.116483] pnp 00:01: [dma 4]
[ 0.116515] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.116569] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.116614] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.116672] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.116723] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.117101] pnp 00:06: [dma 2]
[ 0.117158] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.117297] pnp 00:07: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.117394] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.117761] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117803] pnp 00:0a: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.117809] pnp 00:0a: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.117814] pnp 00:0a: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.117819] pnp 00:0a: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.117869] system 00:0a: [io 0x0400-0x041f] has been reserved
[ 0.117874] system 00:0a: [io 0x0420-0x043f] has been reserved
[ 0.117883] system 00:0a: [io 0x0440-0x045f] has been reserved
[ 0.117887] system 00:0a: [io 0x0460-0x047f] has been reserved
[ 0.117891] system 00:0a: [io 0x0480-0x048f] has been reserved
[ 0.117895] system 00:0a: [io 0xfa00-0xfa3f] has been reserved
[ 0.117899] system 00:0a: [io 0xfc00-0xfc7f] has been reserved
[ 0.117903] system 00:0a: [io 0xfc80-0xfcff] has been reserved
[ 0.117906] system 00:0a: [io 0xfe00-0xfe7f] has been reserved
[ 0.117910] system 00:0a: [io 0xfe80-0xfeff] has been reserved
[ 0.117915] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117997] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.118011] system 00:0b: [io 0x0cb0-0x0cbf] has been reserved
[ 0.118017] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123103] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.123109] system 00:0c: [mem 0x00100000-0xbf7fffff] could not be reserved
[ 0.123113] system 00:0c: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.123117] system 00:0c: [mem 0xfec01000-0xfecfffff] has been reserved
[ 0.123121] system 00:0c: [mem 0xfed00400-0xfed3ffff] has been reserved
[ 0.123126] system 00:0c: [mem 0xfed40000-0xffffffff] could not be reserved
[ 0.123130] system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.123134] system 00:0c: [mem 0x000cd000-0x000e3fff] has been reserved
[ 0.123140] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.123158] pnp: PnP ACPI: found 13 devices
[ 0.123160] ACPI: bus type PNP unregistered
[ 0.132389] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000
[ 0.132397] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000
[ 0.132403] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000
[ 0.132419] pci 0000:00:1f.0: BAR 13: [io 0xf800-0xf87f] has bogus alignment
[ 0.132425] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.132431] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.132436] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.132445] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.132450] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.132455] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.132461] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.132467] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.132473] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.132479] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.132487] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.132500] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.132504] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.132508] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
[ 0.132512] pci_bus 0000:20: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.132515] pci_bus 0000:20: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.132519] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
[ 0.132522] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.132587] NET: Registered protocol family 2
[ 0.132914] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.133358] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.133658] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.133742] TCP: reno registered
[ 0.133763] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.133810] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.133939] NET: Registered protocol family 1
[ 0.133960] pci 0000:00:02.0: Boot video device
[ 0.136135] PCI: CLS 64 bytes, default 64
[ 0.136217] Unpacking initramfs…
[ 0.452667] Freeing initrd memory: 11368K (ffff8800369bc000 - ffff8800374d6000)
[ 0.453695] Initialise system trusted keyring
[ 0.453770] audit: initializing netlink socket (disabled)
[ 0.453792] type=2000 audit(1389700768.452:1): initialized
[ 0.487268] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.489567] zbud: loaded
[ 0.489819] VFS: Disk quotas dquot_6.5.2
[ 0.489896] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.490608] msgmni has been set to 5981
[ 0.490727] Key type big_key registered
[ 0.490730] SELinux: Registering netfilter hooks
[ 0.492149] alg: No test for stdrng (krng)
[ 0.492171] NET: Registered protocol family 38
[ 0.492177] Key type asymmetric registered
[ 0.492180] Asymmetric key parser ‘x509’ registered
[ 0.492255] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.492312] io scheduler noop registered
[ 0.492316] io scheduler deadline registered
[ 0.492367] io scheduler cfq registered (default)
[ 0.492548] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.492662] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.492690] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.492861] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.492870] ACPI: Power Button [PBTN]
[ 0.492932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.492938] ACPI: Power Button [PWRF]
[ 0.493095] ACPI: Requesting acpi_cpufreq
[ 0.493578] GHES: HEST is not enabled!
[ 0.493674] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.494498] Non-volatile memory driver v1.3
[ 0.494503] Linux agpgart interface v0.103
[ 0.494594] agpgart-intel 0000:00:00.0: Intel 965Q Chipset
[ 0.494668] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.495476] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.495682] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.495893] ata_piix 0000:00:1f.2: version 2.13
[ 0.496162] ata_piix 0000:00:1f.2: MAP [
[ 0.496166] P0 P2 P1 P3 ]
[ 0.647054] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.647584] scsi0 : ata_piix
[ 0.647713] scsi1 : ata_piix
[ 0.647785] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x10e0 irq 14
[ 0.647792] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x10e8 irq 15
[ 0.647895] libphy: Fixed MDIO Bus: probed
[ 0.647990] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.647997] ehci-pci: EHCI PCI platform driver
[ 0.648235] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 0.648249] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.648314] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.648334] ehci-pci 0000:00:1a.7: debug port 1
[ 0.652262] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.652287] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0525000
[ 0.658029] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.658115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.658120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.658125] usb usb1: Product: EHCI Host Controller
[ 0.658129] usb usb1: Manufacturer: Linux 3.12.6-300.fc20.x86_64 ehci_hcd
[ 0.658132] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.658299] hub 1-0:1.0: USB hub found
[ 0.658312] hub 1-0:1.0: 4 ports detected
[ 0.658684] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.658696] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.658755] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.658771] ehci-pci 0000:00:1d.7: debug port 1
[ 0.662669] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.662690] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0525400
[ 0.668022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.668104] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.668110] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.668114] usb usb2: Product: EHCI Host Controller
[ 0.668118] usb usb2: Manufacturer: Linux 3.12.6-300.fc20.x86_64 ehci_hcd
[ 0.668122] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.668273] hub 2-0:1.0: USB hub found
[ 0.668287] hub 2-0:1.0: 4 ports detected
[ 0.668467] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.668471] ohci-pci: OHCI PCI platform driver
[ 0.668487] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.668696] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.668701] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.668767] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.668823] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001020
[ 0.668899] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.668903] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.668907] usb usb3: Product: UHCI Host Controller
[ 0.668910] usb usb3: Manufacturer: Linux 3.12.6-300.fc20.x86_64 uhci_hcd
[ 0.668914] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.669079] hub 3-0:1.0: USB hub found
[ 0.669092] hub 3-0:1.0: 2 ports detected
[ 0.669414] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.669420] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.669476] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.669515] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001040
[ 0.669592] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.669597] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.669600] usb usb4: Product: UHCI Host Controller
[ 0.669604] usb usb4: Manufacturer: Linux 3.12.6-300.fc20.x86_64 uhci_hcd
[ 0.669607] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.669744] hub 4-0:1.0: USB hub found
[ 0.669759] hub 4-0:1.0: 2 ports detected
[ 0.670082] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.670088] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.670148] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.670175] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001060
[ 0.670249] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.670254] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.670258] usb usb5: Product: UHCI Host Controller
[ 0.670261] usb usb5: Manufacturer: Linux 3.12.6-300.fc20.x86_64 uhci_hcd
[ 0.670264] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.670404] hub 5-0:1.0: USB hub found
[ 0.670417] hub 5-0:1.0: 2 ports detected
[ 0.670728] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.670734] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.670797] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.670825] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001080
[ 0.670897] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.670902] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.670906] usb usb6: Product: UHCI Host Controller
[ 0.670909] usb usb6: Manufacturer: Linux 3.12.6-300.fc20.x86_64 uhci_hcd
[ 0.670912] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.671059] hub 6-0:1.0: USB hub found
[ 0.671071] hub 6-0:1.0: 2 ports detected
[ 0.671291] usbcore: registered new interface driver usbserial
[ 0.671306] usbcore: registered new interface driver usbserial_generic
[ 0.671318] usbserial: USB Serial support registered for generic
[ 0.671382] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.674187] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.674202] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.674403] mousedev: PS/2 mouse device common for all mice
[ 0.674736] rtc_cmos 00:02: RTC can wake from S4
[ 0.674908] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.674938] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.675079] device-mapper: uevent: version 1.0.3
[ 0.675209] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 0.675600] hidraw: raw HID events driver © Jiri Kosina
[ 0.675777] usbcore: registered new interface driver usbhid
[ 0.675780] usbhid: USB HID core driver
[ 0.675840] drop_monitor: Initializing network drop monitor service
[ 0.675950] ip_tables: © 2000-2006 Netfilter Core Team
[ 0.675995] TCP: cubic registered
[ 0.675999] Initializing XFRM netlink socket
[ 0.676219] NET: Registered protocol family 10
[ 0.676537] mip6: Mobile IPv6
[ 0.676543] NET: Registered protocol family 17
[ 0.676961] Loading compiled-in X.509 certificates
[ 0.678742] Loaded X.509 cert ‘Fedora kernel signing key: a48e22480e056a1db02ebabf1a9d9167dd32a888’
[ 0.678760] registered taskstats version 1
[ 0.679418] Magic number: 14:627:984
[ 0.679519] rtc_cmos 00:02: setting system clock to 2014-01-14 11:59:29 UTC (1389700769)
[ 0.679574] PM: Hibernation image not present or could not be loaded.
[ 0.697963] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.011045] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 1.145712] usb 1-2: New USB device found, idVendor=041e, idProduct=4083
[ 1.145719] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.145723] usb 1-2: Product: VF0640 Live! Cam Socialize
[ 1.145727] usb 1-2: Manufacturer: Creative Labs
[ 1.145731] usb 1-2: SerialNumber: 2H250557
[ 1.269900] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.269915] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.353041] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 1.408079] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.408097] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.427324] ata1.00: ATA-7: HDT722525DLA380, V44OA96A, max UDMA/133
[ 1.427330] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.433316] ata1.00: configured for UDMA/133
[ 1.433482] scsi 0:0:0:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5
[ 1.433737] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.433768] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.433886] sd 0:0:0:0: [sda] Write Protect is off
[ 1.433891] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.433926] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 1.446288] sda: sda1 sda2
[ 1.446663] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.448752] Freeing unused kernel memory: 1444K (ffffffff81d06000 - ffffffff81e6f000)
[ 1.448757] Write protecting the kernel read-only data: 12288k
[ 1.455599] Freeing unused kernel memory: 1564K (ffff880001679000 - ffff880001800000)
[ 1.455615] tsc: Refined TSC clocksource calibration: 2792.999 MHz
[ 1.460224] Freeing unused kernel memory: 1164K (ffff880001add000 - ffff880001c00000)
[ 1.467114] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 1.467405] systemd[1]: Running in initial RAM disk.
[ 1.467514] systemd[1]: Set hostname to <localhost.localdomain>.
[ 1.470004] usb 2-4: New USB device found, idVendor=03f0, idProduct=002a
[ 1.470039] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.470044] usb 2-4: Product: HP LaserJet Professional P1102
[ 1.470048] usb 2-4: Manufacturer: Hewlett-Packard
[ 1.470051] usb 2-4: SerialNumber: 000000000Q81C2JTPR1a
[ 1.479073] systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device…
[ 1.479102] systemd[1]: Expecting device dev-disk-by\x2duuid-55ced29a\x2d8f9f\x2d4232\x2d9995\x2d0f92cdf2b1dc.device…
[ 1.479122] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device…
[ 1.479142] systemd[1]: Starting -.slice.
[ 1.479453] systemd[1]: Created slice -.slice.
[ 1.479477] systemd[1]: Starting System Slice.
[ 1.479617] systemd[1]: Created slice System Slice.
[ 1.479635] systemd[1]: Starting Slices.
[ 1.479655] systemd[1]: Reached target Slices.
[ 1.479672] systemd[1]: Starting Timers.
[ 1.479691] systemd[1]: Reached target Timers.
[ 1.479710] systemd[1]: Starting Journal Socket.
[ 1.479820] systemd[1]: Listening on Journal Socket.
[ 1.480179] systemd[1]: Starting dracut cmdline hook…
[ 1.480962] systemd[1]: Starting Create list of required static device nodes for the current kernel…
[ 1.481649] systemd[1]: Starting Setup Virtual Console…
[ 1.485036] systemd[1]: Starting Journal Service…
[ 1.485781] systemd[1]: Started Journal Service.
[ 1.505288] systemd-journald[61]: Vacuuming done, freed 0 bytes
[ 1.679061] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 1.766990] systemd-udevd[174]: starting version 208
[ 1.836885] usb 3-1: New USB device found, idVendor=1bcf, idProduct=0007
[ 1.836893] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.836897] usb 3-1: Product: USB Optical Mouse
[ 1.857434] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input5
[ 1.859355] hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 1.862072] [drm] Initialized drm 1.1.0 20060810
[ 1.912065] [drm] Memory usable by graphics device = 512M
[ 1.912080] i915 0000:00:02.0: setting latency timer to 64
[ 1.939103] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[ 1.939120] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.939124] [drm] Driver supports precise vblank timestamp query.
[ 1.939202] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.940692] [drm] initialized overlay support
[ 1.991917] fbcon: inteldrmfb (fb0) is primary device
[ 2.023031] Console: switching to colour frame buffer device 240x67
[ 2.031994] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.031998] i915 0000:00:02.0: registered panic notifier
[ 2.032590] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20130725/video-1236)
[ 2.032603] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 2.032678] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 2.032813] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.455137] Switched to clocksource tsc
[ 2.561932] bio: create slab at 1
[ 2.817204] PM: Starting manual resume from disk
[ 2.817215] PM: Hibernation image partition 253:0 present
[ 2.817218] PM: Looking for hibernation image.
[ 2.817447] PM: Image not found (code -22)
[ 2.817451] PM: Hibernation image not present or could not be loaded.
[ 2.895715] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.166610] systemd-journald[61]: Received SIGTERM
[ 3.683731] type=1404 audit(1389700772.502:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 4.013374] SELinux: 2048 avtab hash slots, 101316 rules.
[ 4.039586] SELinux: 2048 avtab hash slots, 101316 rules.
[ 4.068188] SELinux: 8 users, 83 roles, 4634 types, 265 bools, 1 sens, 1024 cats
[ 4.068195] SELinux: 83 classes, 101316 rules
[ 4.076179] SELinux: Completing initialization.
[ 4.076184] SELinux: Setting up existing superblocks.
[ 4.076200] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.076208] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 4.076226] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 4.076235] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.076249] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.076292] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 4.078099] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 4.080753] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.080763] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 4.080775] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 4.080781] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 4.080787] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 4.080829] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 4.080843] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 4.080858] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 4.080890] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.081695] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 4.081699] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.081711] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.081940] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.082024] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082045] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 4.082049] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082063] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082074] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082096] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082105] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082113] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082121] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082143] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082151] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.082170] SELinux: initialized (dev dm-1, type ext4), uses xattr
[ 4.100488] type=1403 audit(1389700772.919:3): policy loaded auid=4294967295 ses=4294967295
[ 4.138907] systemd[1]: Successfully loaded SELinux policy in 474.828ms.
[ 4.305210] systemd[1]: Relabelled /dev and /run in 36.862ms.
[ 5.573360] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 6.250158] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.266630] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 6.267389] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 6.284840] systemd-journald[392]: Vacuuming done, freed 0 bytes
[ 6.778498] systemd-udevd[407]: starting version 208
[ 6.873296] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 8.076381] pps_core: LinuxPPS API ver. 1 registered
[ 8.076388] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 8.078775] PTP clock support registered
[ 8.080252] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.088956] mei_me 0000:00:03.0: setting latency timer to 64
[ 8.089456] e1000e: Intel® PRO/1000 Network Driver - 2.3.2-k
[ 8.089462] e1000e: Copyright© 1999 - 2013 Intel Corporation.
[ 8.092739] mei_me 0000:00:03.0: irq 42 for MSI/MSI-X
[ 8.107935] wmi: Mapper loaded
[ 8.112681] e1000e 0000:00:19.0: setting latency timer to 64
[ 8.112777] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 8.112812] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.295150] microcode: CPU0 sig=0xf65, pf=0x4, revision=0x7
[ 8.431222] microcode: CPU1 sig=0xf65, pf=0x4, revision=0x7
[ 8.431353] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba
[ 8.439483] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1a:4b:3f:1b:d4
[ 8.439491] e1000e 0000:00:19.0 eth0: Intel® PRO/1000 Network Connection
[ 8.439815] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: 1002FF-0FF
[ 8.441093] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8.461394] hda_codec: ALC262: SKU not ready 0x411111f0
[ 8.461644] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 8.461651] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 8.461655] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 8.461657] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
[ 8.461660] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
[ 8.461664] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x1a
[ 8.461667] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x19
[ 8.461670] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[ 8.461675] ALSA sound/pci/hda/patch_realtek.c:574 realtek: Enable default setup for auto mode as fallback
[ 8.491098] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.491471] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.491689] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.491899] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.493414] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 8.497810] iTCO_vendor_support: vendor-support=0
[ 8.500145] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 8.500190] iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0xf860)
[ 8.500790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.523910] usbcore: registered new interface driver snd-usb-audio
[ 8.580774] WARNING! power/level is deprecated; use power/control instead
[ 8.594514] usblp 2-4:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[ 8.595088] usbcore: registered new interface driver usblp
[ 8.780528] media: Linux media interface: v0.10
[ 8.786948] Linux video capture interface: v2.00
[ 8.797781] uvcvideo: Found UVC 1.00 device VF0640 Live! Cam Socialize (041e:4083)
[ 8.800660] input: VF0640 Live! Cam Socialize as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input12
[ 8.801458] usbcore: registered new interface driver uvcvideo
[ 8.801464] USB Video Class driver (1.1.1)
[ 9.755246] systemd-udevd[431]: renamed network interface eth0 to em1
[ 9.903347] Adding 3162108k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:3162108k FS
[ 10.840295] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.859667] SELinux: initialized (dev sda1, type ext4), uses xattr
[ 11.893962] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.893979] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 11.925526] systemd-journald[392]: Received request to flush runtime journal from PID 1
[ 12.136102] type=1305 audit(1389700780.955:4): audit_pid=523 old=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:auditd_t:s0 res=1
[ 13.124029] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 13.124043] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 17.764394] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 17.803077] ip6_tables: © 2000-2006 Netfilter Core Team
[ 17.908886] Ebtables v2.0 registered
[ 17.972335] Bridge firewalling registered
[ 18.310886] cfg80211: Calling CRDA to update world regulatory domain
[ 18.322989] cfg80211: World regulatory domain updated:
[ 18.322997] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.323002] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.323031] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.323035] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.323038] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.323041] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.136036] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 19.136050] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 19.219327] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 19.320094] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 19.320256] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
[ 19.443537] Bluetooth: Core ver 2.16
[ 19.444658] NET: Registered protocol family 31
[ 19.444664] Bluetooth: HCI device and connection manager initialized
[ 19.444686] Bluetooth: HCI socket layer initialized
[ 19.444691] Bluetooth: L2CAP socket layer initialized
[ 19.444705] Bluetooth: SCO socket layer initialized
[ 19.454433] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.454440] Bluetooth: BNEP filters: protocol multicast
[ 19.454460] Bluetooth: BNEP socket layer initialized
[ 20.595890] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 20.596046] e1000e 0000:00:19.0 em1: 10/100 speed: disabling TSO
[ 20.596097] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
[ 21.108349] usblp0: removed
[ 21.122868] usblp 2-4:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[ 25.148030] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 25.148044] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 30.152818] fuse init (API version 7.22)
[ 30.184399] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 30.196237] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 31.160019] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 31.160033] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 37.172032] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 37.172045] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 43.184046] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 43.184061] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 49.196059] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 49.196073] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 55.208021] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 55.208035] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 61.220032] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 61.220047] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 67.232032] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 67.232046] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 73.244038] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 73.244051] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 79.256060] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 79.256074] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 85.268028] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 85.268043] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 91.280049] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 91.280063] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 97.292040] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 97.292053] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 103.304059] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 103.304071] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 103.454131] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling…
[ 103.454142] usb 3-1: USB disconnect, device number 2
[ 103.679045] usb 3-1: new low-speed USB device number 3 using uhci_hcd
[ 103.834464] usb 3-1: New USB device found, idVendor=1bcf, idProduct=0007
[ 103.834472] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 103.834477] usb 3-1: Product: USB Optical Mouse
[ 103.856249] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input13
[ 103.856772] hid-generic 0003:1BCF:0007.0002: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 106.412044] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 106.529763] usb 2-3: New USB device found, idVendor=0951, idProduct=1665
[ 106.529770] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 106.529774] usb 2-3: Product: DataTraveler 2.0
[ 106.529778] usb 2-3: Manufacturer: Kingston
[ 106.529782] usb 2-3: SerialNumber: 001CC0EC34A2FD210709C710
[ 106.596893] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 106.597923] scsi2 : usb-storage 2-3:1.0
[ 106.598772] usbcore: registered new interface driver usb-storage
[ 107.641646] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[ 107.642601] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 107.645635] sd 2:0:0:0: [sdb] 30233588 512-byte logical blocks: (15.4 GB/14.4 GiB)
[ 107.651475] sd 2:0:0:0: [sdb] Write Protect is off
[ 107.651484] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 00
[ 107.653626] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn’t support DPO or FUA
[ 107.659517] sdb: sdb1
[ 107.662506] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 107.974788] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
[ 109.316026] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 109.316040] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 115.328066] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 115.328080] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 121.340072] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 121.340086] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 127.352060] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 127.352072] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 133.364027] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 133.364041] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 139.376049] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 139.376063] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 145.388067] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 145.388081] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 151.400030] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 151.400044] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 157.412035] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 157.412050] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 163.424031] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 163.424045] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 169.436078] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 169.436094] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 175.448037] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 175.448051] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 181.460034] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 181.460047] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 187.472026] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 187.472040] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 193.484041] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 193.484054] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 199.496038] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 199.496051] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 205.508036] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 205.508050] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 211.520039] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 211.520052] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 217.532048] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 217.532061] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 223.544026] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 223.544039] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 229.556046] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 229.556060] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 235.568050] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 235.568064] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 241.580050] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 241.580065] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 247.592053] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 247.592067] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 253.604034] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 253.604048] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 259.616036] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 259.616050] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 265.628029] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 265.628043] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 271.640033] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 271.640047] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 277.652049] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 277.652063] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 283.664033] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 283.664047] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 289.676035] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 289.676048] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 295.688074] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 295.688089] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 301.704031] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 301.704047] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 307.716028] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 307.716042] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 313.728025] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 313.728040] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 319.740024] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 319.740039] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 325.752027] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 325.752040] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 331.764030] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 331.764044] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 337.776077] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 337.776090] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 343.788027] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 343.788042] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 349.089498] usb 2-3: USB disconnect, device number 3
[ 349.147727] FAT-fs (sdb1): unable to read boot sector to mark fs as dirty
[ 349.800052] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 349.800066] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 350.931044] usb 2-3: new high-speed USB device number 4 using ehci-pci
[ 351.048778] usb 2-3: New USB device found, idVendor=0951, idProduct=1665
[ 351.048784] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 351.048789] usb 2-3: Product: DataTraveler 2.0
[ 351.048793] usb 2-3: Manufacturer: Kingston
[ 351.048797] usb 2-3: SerialNumber: 001CC0EC34A2FD210709C710
[ 351.050508] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 351.050992] scsi3 : usb-storage 2-3:1.0
[ 352.095680] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[ 352.096890] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 352.099916] sd 3:0:0:0: [sdb] 30233588 512-byte logical blocks: (15.4 GB/14.4 GiB)
[ 352.100623] sd 3:0:0:0: [sdb] Write Protect is off
[ 352.100630] sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 00
[ 352.101620] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn’t support DPO or FUA
[ 352.107584] sdb: sdb1
[ 352.110040] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 352.356542] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 352.356561] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
[ 355.812035] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 355.812049] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 361.824046] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 361.824061] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 367.836028] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 367.836041] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 373.848033] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 373.848047] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 379.860045] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 379.860060] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 385.872046] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 385.872059] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 391.884038] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 391.884051] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 397.896047] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 397.896061] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 403.908048] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 403.908062] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 409.920034] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 409.920047] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 415.932043] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 415.932056] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 421.944068] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 421.944082] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 427.956018] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 427.956032] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 433.968027] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 433.968042] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 439.980029] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 439.980043] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 445.992031] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 445.992045] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 452.004040] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 452.004055] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 458.016030] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 458.016043] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 464.028032] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 464.028046] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 470.040027] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 470.040040] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 476.052031] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 476.052045] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 482.064058] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 482.064072] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 488.076033] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 488.076047] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 494.088041] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 494.088055] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 500.100032] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 500.100046] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 506.112045] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 506.112059] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 512.124036] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 512.124050] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 518.136034] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 518.136048] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ 524.148029] mei_me 0000:00:03.0: reset: connect/disconnect timeout.
[ 524.148042] mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[radek@localhost ~]$ sudo less /var/log/messages
[sudo] password for radek:
radek is not in the sudoers file. This incident will be reported.
[radek@localhost ~]$

Zdravim

prvne, koukej spis do /run/media/ nez /media, za druhe rekl bych ze se to bude chovat podobe jako v Nautilu, pokud jej Caja vidi, klikni na usb disk v Caja, aby se usb disk mountnul a potom bys ho mel videt i pod /run/media//.

Pripominam, ze Caja jsem nikdy zapnuty nemel. Pokud se disk automaticky nemountne, je potreba to udelat prikazem mount z cmd liny. System o tvem disku ‘Kingston - DataTraveler 2.0’ ocividne vi a najdes ho pod /dev/sdb.

Takze jako root se mrkni jak je usb disk rozdeleny a podle vypisu adekvatne pripojit. Napr:

# fdisk -l /dev/sdb
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *        2048     2099199     1048576    b  W95 FAT32
/dev/sdb2         2099200     8027792     2964296+   b  W95 FAT32

# mount /dev/sdb1 /mnt

Potom tvuj disk najdes pripojeny pod /mnt. Google je kdyztak plny prikladu, nebo manual pro mount.

kuku.mp3

Pro větší přehlednost postovaní logů, je dobré použít http://fpaste.org/ .

blkid

je tedy potřeba spouštět pod rootem, pokud nejsi v /etc/sudoers

Systém tvou flashku poznal

[ 351.050508] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 351.050992] scsi3 : usb-storage 2-3:1.0
[ 352.095680] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[ 352.107584] sdb: sdb1
[ 352.110040] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 352.356542] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

A doporučuje ti abys pustil fsck na /dev/sdb1
Další viz výše u kuku.

Problem je skutecne v tom, ze automatickou mount v gnome/kde atd pripojuje nove zarizeni do /var/media/

Zarizeni lze pripojit i rucne bez prav roota pomoci udisks/devkit-disks
udisks --mount /dev/sdxY
cimz se pripoji zpravidla do /media/ - musi clovek ovsem znat jmeno zarizeni jako pise creep73.

Nedalo mi a stahnul jsem si Live MATE (20) do virtualboxu. Po pripojeni usb disku, se mi obe partitiony na mem usb disku pripojili a vyskocili v Caja. Stejne tak jsem je nasel pod /run/media/liveuser

[root@localhost ~]# fdisk -l /dev/sda

Disk /dev/sda: 3.8 GiB, 4110230016 bytes, 8027793 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x57155aa7

Device    Boot     Start       End  Blocks  Id System
/dev/sda1 *         2048   2099199 1048576   b W95 FAT32
/dev/sda2        2099200   8027792 2964296+  b W95 FAT32

[root@localhost ~]# ls -l /run/media/liveuser/
total 8
drwx------. 2 liveuser liveuser 4096 Dec 31  1969 FLASH
drwx------. 6 liveuser liveuser 4096 Dec 31  1969 LIVE

Problem u tebe bude jak pise creep73 v tom, ze pri poslednim unmountu nebyl usb disk spravne odmountovan a je potreba na nem pustit fsck (jako root)

# fsck /dev/sdb1

Potom by melo stacit jej vysunout a zasunout zpet a mel by se ti automaticky pripojit.

kuku.mp3

Děkuji za pomoc . Vyřešeno pomoci /run/media/ . Nalezl jsem všechny USB