fedora 12 a 13 mrzne

České forum
1

Zamrzává mi X.Org. Textový režim mi ještě nezamrzl ani jednou. Stává se to ve hrách ale už se to stalo párkrát i na ploše v oknech. Klávesnice reaguje takže se většinou jde přepnout do konsole ale ne vždy. Kurzorem myši jde hýbat. Když se přepnu do konsole a pak zpátky přestane jít hýbat kurzorem. Pomůže jedině restartovat X. Někdy to nezamrzne úplně, ale grafika vykazuje aktivitu třeba 1 snímek za několik vteřin , většinou je to však nehybné. Když se to stalo a byl spuštěný taky Audacious tak hudba hrála dál.

Grafická karta je Nvidia GeForce 9600 GT.
Ovladače jsem testoval nv, nouveau, nvidia (s nouveau v blacklistu) a fbdev a zamrzlo to na každém z nich.
Procesor mám čtyřjádrový 4x2,2 Ghz
Paměť 4GB

zkoušel jsem řešení co jsem našel na internetu
parametry jádra nomodeset a noapic
v Xorg.conf v sekci device Option AccelMethod “EXA” nebo pak “XAA”
nic nepomohlo

ve windows mi to nedělá je to jen ve Fedoře 12 a teď už i 13

nejčastěji to spadne v emulátorech jako je gfceu nebo mame , tam to spadne většinou velmi brzy ale stává se i to že to jede dlouho (ty hry) a nic nepadá a zamrzne to až když spustím program znovu

logy jsem nestudoval protože informace v nich mi moc neřeknou, nejsem zkušený uživatel linuxu takže pokud byste chtěli někdo vidět co je v logu tak mi prosím kdyžtak i řekněte přesně který log nebo nejlépe kde přesně je cestu i se souborem a já to sem vložím k tomu

poraďte co mám dělat aby to přestalo zamrzávat

2

Musim rict, ze si vyzkousel vsechno co me z hlavy napada. Prijde mi ale hodne divne, ze se to chova stejne se vsemi tremi ovladaci. Pohled na konec logu /var/log/Xorg.0.log bude asi nezbytny. Pokud Xka jeste reaguji, je pravdepodobne, ze by tam mohlo neco smysluplneho byt, stejne tak jako na konci /var/log/messages.

3

Xorg.0.log :
[ 1352.684]
X.Org X Server 1.8.0
Release Date: 2010-04-02
[ 1352.684] X Protocol Version 11, Revision 0
[ 1352.684] Build Operating System: x86-02 2.6.18-164.15.1.el5
[ 1352.684] Current Operating System: Linux Core2Quad 2.6.33.5-112.fc13.x86_64 #1 SMP Thu May 27 02:28:31 UTC 2010 x86_64
[ 1352.684] Kernel command line: ro root=UUID=58522770-c394-4a55-a6db-9b9d2e78fd10 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=cs_CZ.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=cz-us-qwertz nomodeset noapic vga=791 rdblacklist=nouveau quiet
[ 1352.684] Build Date: 02 May 2010 02:56:53PM
[ 1352.684] Build ID: xorg-x11-server 1.8.0-12.fc13
[ 1352.684] Current version of pixman: 0.18.0
[ 1352.684] Before reporting problems, check http://bodhi.fedoraproject.org/
to make sure that you have the latest version.
[ 1352.684] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1352.685] (==) Log file: “/var/log/Xorg.0.log”, Time: Wed Jun 2 19:18:10 2010
[ 1352.685] (==) Using config file: “/etc/X11/xorg.conf”
[ 1352.685] (==) Using config directory: “/etc/X11/xorg.conf.d”
[ 1352.685] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 1352.685] (==) ServerLayout “Default Layout”
[ 1352.685] () |–>Screen “Screen0” (0)
[ 1352.685] () | |–>Monitor “Monitor0”
[ 1352.685] () | |–>Device “Device0”
[ 1352.685] () |–>Input Device “Keyboard0”
[ 1352.685] () |–>Input Device “Mouse0”
[ 1352.685] () Option “Xinerama” “0”
[ 1352.685] () Option “AIGLX” “on”
[ 1352.685] (==) Automatically adding devices
[ 1352.685] (==) Automatically enabling devices
[ 1352.685] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 1352.685] () ModulePath set to “/usr/lib64/xorg/modules/extensions/nvidia,/usr/lib64/xorg/modules”
[ 1352.685] () Extension “Composite” is enabled
[ 1352.685] (WW) AllowEmptyInput is on, devices using drivers ‘kbd’, ‘mouse’ or ‘vmmouse’ will be disabled.
[ 1352.685] (WW) Disabling Keyboard0
[ 1352.685] (WW) Disabling Mouse0
[ 1352.685] (II) Loader magic: 0x7ce560
[ 1352.685] (II) Module ABI versions:
[ 1352.685] X.Org ANSI C Emulation: 0.4
[ 1352.685] X.Org Video Driver: 7.0
[ 1352.685] X.Org XInput driver : 9.0
[ 1352.685] X.Org Server Extension : 3.0
[ 1352.690] (–) PCI:*(0:1:0:0) 10de:0622:1462:1270 nVidia Corporation G94 [GeForce 9600 GT] rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x???/524288
[ 1352.690] (II) LoadModule: “extmod”
[ 1352.691] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 1352.691] (II) Module extmod: vendor=“X.Org Foundation”
[ 1352.691] compiled for 1.8.0, module version = 1.0.0
[ 1352.691] Module class: X.Org Server Extension
[ 1352.691] ABI class: X.Org Server Extension, version 3.0
[ 1352.691] (II) Loading extension SELinux
[ 1352.691] (II) Loading extension MIT-SCREEN-SAVER
[ 1352.691] (II) Loading extension XFree86-VidModeExtension
[ 1352.691] (II) Loading extension XFree86-DGA
[ 1352.691] (II) Loading extension DPMS
[ 1352.691] (II) Loading extension XVideo
[ 1352.691] (II) Loading extension XVideo-MotionCompensation
[ 1352.691] (II) Loading extension X-Resource
[ 1352.691] (II) LoadModule: “dbe”
[ 1352.692] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 1352.692] (II) Module dbe: vendor=“X.Org Foundation”
[ 1352.692] compiled for 1.8.0, module version = 1.0.0
[ 1352.692] Module class: X.Org Server Extension
[ 1352.692] ABI class: X.Org Server Extension, version 3.0
[ 1352.692] (II) Loading extension DOUBLE-BUFFER
[ 1352.692] (II) LoadModule: “glx”
[ 1352.692] (II) Loading /usr/lib64/xorg/modules/extensions/nvidia/libglx.so
[ 1352.694] (II) Module glx: vendor=“NVIDIA Corporation”
[ 1352.694] compiled for 4.0.2, module version = 1.0.0
[ 1352.694] Module class: X.Org Server Extension
[ 1352.694] (II) NVIDIA GLX Module 195.36.24 Thu Apr 22 19:52:00 PDT 2010
[ 1352.694] (II) Loading extension GLX
[ 1352.694] (II) LoadModule: “record”
[ 1352.694] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 1352.694] (II) Module record: vendor=“X.Org Foundation”
[ 1352.694] compiled for 1.8.0, module version = 1.13.0
[ 1352.694] Module class: X.Org Server Extension
[ 1352.694] ABI class: X.Org Server Extension, version 3.0
[ 1352.694] (II) Loading extension RECORD
[ 1352.694] (II) LoadModule: “dri”
[ 1352.695] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 1352.695] (II) Module dri: vendor=“X.Org Foundation”
[ 1352.695] compiled for 1.8.0, module version = 1.0.0
[ 1352.695] ABI class: X.Org Server Extension, version 3.0
[ 1352.695] (II) Loading extension XFree86-DRI
[ 1352.695] (II) LoadModule: “dri2”
[ 1352.695] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 1352.695] (II) Module dri2: vendor=“X.Org Foundation”
[ 1352.695] compiled for 1.8.0, module version = 1.2.0
[ 1352.695] ABI class: X.Org Server Extension, version 3.0
[ 1352.695] (II) Loading extension DRI2
[ 1352.695] (II) LoadModule: “nvidia”
[ 1352.696] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 1352.696] (II) Module nvidia: vendor=“NVIDIA Corporation”
[ 1352.696] compiled for 4.0.2, module version = 1.0.0
[ 1352.696] Module class: X.Org Video Driver
[ 1352.696] (II) NVIDIA dlloader X Driver 195.36.24 Thu Apr 22 19:18:54 PDT 2010
[ 1352.696] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1352.696] (++) using VT number 1

[ 1352.696] (II) Primary Device is: PCI 01@00:00:0
[ 1352.696] (II) Loading sub module “fb”
[ 1352.697] (II) LoadModule: “fb”
[ 1352.697] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 1352.697] (II) Module fb: vendor=“X.Org Foundation”
[ 1352.697] compiled for 1.8.0, module version = 1.0.0
[ 1352.697] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1352.697] (II) Loading sub module “wfb”
[ 1352.697] (II) LoadModule: “wfb”
[ 1352.697] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 1352.697] (II) Module wfb: vendor=“X.Org Foundation”
[ 1352.697] compiled for 1.8.0, module version = 1.0.0
[ 1352.697] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1352.697] (II) Loading sub module “ramdac”
[ 1352.697] (II) LoadModule: “ramdac”
[ 1352.697] (II) Module “ramdac” already built-in
[ 1352.697] () NVIDIA(0): Depth 24, (–) framebuffer bpp 32
[ 1352.697] (==) NVIDIA(0): RGB weight 888
[ 1352.697] (==) NVIDIA(0): Default visual is TrueColor
[ 1352.697] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1352.697] () NVIDIA(0): Option “TwinView” “0”
[ 1352.698] () NVIDIA(0): Option “MetaModes” “1680x1050_60 +0+0”
[ 1352.698] () NVIDIA(0): Option “TwinViewXineramaInfoOrder” “CRT-0”
[ 1352.698] () NVIDIA(0): Enabling RENDER acceleration
[ 1352.698] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 1352.698] (II) NVIDIA(0): enabled.
[ 1353.896] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[ 1353.897] (–) NVIDIA(0): Memory: 1048576 kBytes
[ 1353.897] (–) NVIDIA(0): VideoBIOS: 62.94.21.00.19
[ 1353.897] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1353.897] (–) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 1353.897] (–) NVIDIA(0): Connected display device(s) on GeForce 9600 GT at PCI:1:0:0:
[ 1353.897] (–) NVIDIA(0): Hitachi X224W D-sub (CRT-0)
[ 1353.897] (–) NVIDIA(0): Hitachi X224W D-sub (CRT-0): 400.0 MHz maximum pixel clock
[ 1353.969] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 1353.969] (II) NVIDIA(0): Validated modes:
[ 1353.969] (II) NVIDIA(0): “1680x1050_60+0+0”
[ 1353.969] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 1353.993] (–) NVIDIA(0): DPI set to (90, 91); computed from “UseEdidDpi” X config
[ 1353.993] (–) NVIDIA(0): option
[ 1353.993] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 1353.993] (–) Depth 24 pixmap format is 32 bpp
[ 1353.993] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 1353.993] (II) NVIDIA(0): Initialized GPU GART.
[ 1353.999] (II) NVIDIA(0): Setting mode “1680x1050_60+0+0”
[ 1354.035] (II) Loading extension NV-GLX
[ 1354.062] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 1354.068] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1354.068] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 1354.068] (==) NVIDIA(0): Backing store disabled
[ 1354.068] (==) NVIDIA(0): Silken mouse enabled
[ 1354.085] (==) NVIDIA(0): DPMS enabled
[ 1354.085] (II) Loading extension NV-CONTROL
[ 1354.085] (II) Loading extension XINERAMA
[ 1354.085] (II) Loading sub module “dri2”
[ 1354.085] (II) LoadModule: “dri2”
[ 1354.086] (II) Reloading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 1354.086] (II) NVIDIA(0): [DRI2] Setup complete
[ 1354.086] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1354.086] (==) RandR enabled
[ 1354.086] (II) Initializing built-in extension Generic Event Extension
[ 1354.086] (II) Initializing built-in extension SHAPE
[ 1354.086] (II) Initializing built-in extension MIT-SHM
[ 1354.086] (II) Initializing built-in extension XInputExtension
[ 1354.086] (II) Initializing built-in extension XTEST
[ 1354.086] (II) Initializing built-in extension BIG-REQUESTS
[ 1354.086] (II) Initializing built-in extension SYNC
[ 1354.086] (II) Initializing built-in extension XKEYBOARD
[ 1354.086] (II) Initializing built-in extension XC-MISC
[ 1354.086] (II) Initializing built-in extension XINERAMA
[ 1354.086] (II) Initializing built-in extension XFIXES
[ 1354.086] (II) Initializing built-in extension RENDER
[ 1354.086] (II) Initializing built-in extension RANDR
[ 1354.086] (II) Initializing built-in extension COMPOSITE
[ 1354.086] (II) Initializing built-in extension DAMAGE
[ 1354.086] (II) SELinux: Disabled on system
[ 1354.087] (II) Initializing extension GLX
[ 1354.128] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1354.128] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 1354.128] () Power Button: Applying InputClass “system-setup-keyboard”
[ 1354.128] (II) LoadModule: “evdev”
[ 1354.128] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1354.128] (II) Module evdev: vendor=“X.Org Foundation”
[ 1354.128] compiled for 1.7.99.901, module version = 2.4.0
[ 1354.128] Module class: X.Org XInput Driver
[ 1354.128] ABI class: X.Org XInput driver, version 9.0
[ 1354.128] () Power Button: always reports core events
[ 1354.128] () Power Button: Device: “/dev/input/event1”
[ 1354.138] (II) Power Button: Found keys
[ 1354.138] (II) Power Button: Configuring as keyboard
[ 1354.138] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD)
[ 1354.138] () Option “xkb_rules” “evdev”
[ 1354.138] () Option “xkb_model” “pc105”
[ 1354.138] () Option “xkb_layout” “cz,us”
[ 1354.138] () Option “xkb_variant” “qwerty”
[ 1354.138] () Option “xkb_options” “terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll”
[ 1354.163] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1354.163] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 1354.163] () Power Button: Applying InputClass “system-setup-keyboard”
[ 1354.163] () Power Button: always reports core events
[ 1354.163] () Power Button: Device: “/dev/input/event0”
[ 1354.172] (II) Power Button: Found keys
[ 1354.172] (II) Power Button: Configuring as keyboard
[ 1354.172] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD)
[ 1354.172] () Option “xkb_rules” “evdev”
[ 1354.172] () Option “xkb_model” “pc105”
[ 1354.172] () Option “xkb_layout” “cz,us”
[ 1354.172] () Option “xkb_variant” “qwerty”
[ 1354.172] () Option “xkb_options” “terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll”
[ 1354.176] (II) config/udev: Adding input device Logitech Logitech Cordless RumblePad 2 (/dev/input/event4)
[ 1354.176] (EE) No input driver/identifier specified (ignoring)
[ 1354.176] (II) config/udev: Adding input device Logitech Logitech Cordless RumblePad 2 (/dev/input/js0)
[ 1354.176] (EE) No input driver/identifier specified (ignoring)
[ 1354.179] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 1354.179] () AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
[ 1354.179] () AT Translated Set 2 keyboard: Applying InputClass “system-setup-keyboard”
[ 1354.179] () AT Translated Set 2 keyboard: always reports core events
[ 1354.179] () AT Translated Set 2 keyboard: Device: “/dev/input/event3”
[ 1354.184] (II) AT Translated Set 2 keyboard: Found keys
[ 1354.184] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 1354.184] (II) XINPUT: Adding extended input device “AT Translated Set 2 keyboard” (type: KEYBOARD)
[ 1354.184] () Option “xkb_rules” “evdev”
[ 1354.184] () Option “xkb_model” “pc105”
[ 1354.184] () Option “xkb_layout” “cz,us”
[ 1354.184] () Option “xkb_variant” “qwerty”
[ 1354.184] () Option “xkb_options” “terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll”
[ 1354.184] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 1354.184] () ImPS/2 Generic Wheel Mouse: Applying InputClass “evdev pointer catchall”
[ 1354.184] () ImPS/2 Generic Wheel Mouse: always reports core events
[ 1354.184] () ImPS/2 Generic Wheel Mouse: Device: “/dev/input/event5”
[ 1354.191] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 1354.191] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 1354.191] (II) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 1354.191] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 1354.191] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 1354.191] () ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 1354.191] () ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1354.191] (II) XINPUT: Adding extended input device “ImPS/2 Generic Wheel Mouse” (type: MOUSE)
[ 1354.191] () ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 1354.191] () ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 1354.191] () ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 1354.191] () ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 1354.191] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 1354.191] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 1354.191] (EE) No input driver/identifier specified (ignoring)
[ 1354.195] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
[ 1354.195] () Macintosh mouse button emulation: Applying InputClass “evdev pointer catchall”
[ 1354.195] () Macintosh mouse button emulation: always reports core events
[ 1354.195] () Macintosh mouse button emulation: Device: “/dev/input/event2”
[ 1354.203] (II) Macintosh mouse button emulation: Found 3 mouse buttons
[ 1354.203] (II) Macintosh mouse button emulation: Found relative axes
[ 1354.203] (II) Macintosh mouse button emulation: Found x and y relative axes
[ 1354.203] (II) Macintosh mouse button emulation: Configuring as mouse
[ 1354.203] () Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
[ 1354.203] () Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1354.203] (II) XINPUT: Adding extended input device “Macintosh mouse button emulation” (type: MOUSE)
[ 1354.203] () Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
[ 1354.203] () Macintosh mouse button emulation: (accel) acceleration profile 0
[ 1354.203] () Macintosh mouse button emulation: (accel) acceleration factor: 2.000
[ 1354.203] () Macintosh mouse button emulation: (accel) acceleration threshold: 4
[ 1354.203] (II) Macintosh mouse button emulation: initialized for relative axes.
[ 1354.203] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
[ 1354.203] (EE) No input driver/identifier specified (ignoring)

4

Xorg.0.log.old:
[ 1279.958]
X.Org X Server 1.8.0
Release Date: 2010-04-02
[ 1279.959] X Protocol Version 11, Revision 0
[ 1279.959] Build Operating System: x86-02 2.6.18-164.15.1.el5
[ 1279.959] Current Operating System: Linux Core2Quad 2.6.33.5-112.fc13.x86_64 #1 SMP Thu May 27 02:28:31 UTC 2010 x86_64
[ 1279.959] Kernel command line: ro root=UUID=58522770-c394-4a55-a6db-9b9d2e78fd10 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=cs_CZ.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=cz-us-qwertz nomodeset noapic vga=791 rdblacklist=nouveau quiet
[ 1279.959] Build Date: 02 May 2010 02:56:53PM
[ 1279.959] Build ID: xorg-x11-server 1.8.0-12.fc13
[ 1279.959] Current version of pixman: 0.18.0
[ 1279.959] Before reporting problems, check http://bodhi.fedoraproject.org/
to make sure that you have the latest version.
[ 1279.959] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1279.959] (==) Log file: “/var/log/Xorg.0.log”, Time: Wed Jun 2 19:16:57 2010
[ 1279.959] (==) Using config file: “/etc/X11/xorg.conf”
[ 1279.959] (==) Using config directory: “/etc/X11/xorg.conf.d”
[ 1279.959] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 1279.959] (==) ServerLayout “Default Layout”
[ 1279.959] () |–>Screen “Screen0” (0)
[ 1279.959] () | |–>Monitor “Monitor0”
[ 1279.959] () | |–>Device “Device0”
[ 1279.960] () |–>Input Device “Keyboard0”
[ 1279.960] () |–>Input Device “Mouse0”
[ 1279.960] () Option “Xinerama” “0”
[ 1279.960] () Option “AIGLX” “on”
[ 1279.960] (==) Automatically adding devices
[ 1279.960] (==) Automatically enabling devices
[ 1279.960] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 1279.960] () ModulePath set to “/usr/lib64/xorg/modules/extensions/nvidia,/usr/lib64/xorg/modules”
[ 1279.960] () Extension “Composite” is enabled
[ 1279.960] (WW) AllowEmptyInput is on, devices using drivers ‘kbd’, ‘mouse’ or ‘vmmouse’ will be disabled.
[ 1279.960] (WW) Disabling Keyboard0
[ 1279.960] (WW) Disabling Mouse0
[ 1279.960] (II) Loader magic: 0x7ce560
[ 1279.960] (II) Module ABI versions:
[ 1279.960] X.Org ANSI C Emulation: 0.4
[ 1279.960] X.Org Video Driver: 7.0
[ 1279.960] X.Org XInput driver : 9.0
[ 1279.960] X.Org Server Extension : 3.0
[ 1279.964] (–) PCI:*(0:1:0:0) 10de:0622:1462:1270 nVidia Corporation G94 [GeForce 9600 GT] rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x???/524288
[ 1279.965] (II) LoadModule: “extmod”
[ 1279.965] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 1279.965] (II) Module extmod: vendor=“X.Org Foundation”
[ 1279.965] compiled for 1.8.0, module version = 1.0.0
[ 1279.965] Module class: X.Org Server Extension
[ 1279.965] ABI class: X.Org Server Extension, version 3.0
[ 1279.965] (II) Loading extension SELinux
[ 1279.965] (II) Loading extension MIT-SCREEN-SAVER
[ 1279.965] (II) Loading extension XFree86-VidModeExtension
[ 1279.966] (II) Loading extension XFree86-DGA
[ 1279.966] (II) Loading extension DPMS
[ 1279.966] (II) Loading extension XVideo
[ 1279.966] (II) Loading extension XVideo-MotionCompensation
[ 1279.966] (II) Loading extension X-Resource
[ 1279.966] (II) LoadModule: “dbe”
[ 1279.966] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 1279.966] (II) Module dbe: vendor=“X.Org Foundation”
[ 1279.966] compiled for 1.8.0, module version = 1.0.0
[ 1279.966] Module class: X.Org Server Extension
[ 1279.966] ABI class: X.Org Server Extension, version 3.0
[ 1279.966] (II) Loading extension DOUBLE-BUFFER
[ 1279.966] (II) LoadModule: “glx”
[ 1279.966] (II) Loading /usr/lib64/xorg/modules/extensions/nvidia/libglx.so
[ 1279.968] (II) Module glx: vendor=“NVIDIA Corporation”
[ 1279.968] compiled for 4.0.2, module version = 1.0.0
[ 1279.968] Module class: X.Org Server Extension
[ 1279.968] (II) NVIDIA GLX Module 195.36.24 Thu Apr 22 19:52:00 PDT 2010
[ 1279.968] (II) Loading extension GLX
[ 1279.968] (II) LoadModule: “record”
[ 1279.968] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 1279.969] (II) Module record: vendor=“X.Org Foundation”
[ 1279.969] compiled for 1.8.0, module version = 1.13.0
[ 1279.969] Module class: X.Org Server Extension
[ 1279.969] ABI class: X.Org Server Extension, version 3.0
[ 1279.969] (II) Loading extension RECORD
[ 1279.969] (II) LoadModule: “dri”
[ 1279.969] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 1279.969] (II) Module dri: vendor=“X.Org Foundation”
[ 1279.969] compiled for 1.8.0, module version = 1.0.0
[ 1279.969] ABI class: X.Org Server Extension, version 3.0
[ 1279.969] (II) Loading extension XFree86-DRI
[ 1279.969] (II) LoadModule: “dri2”
[ 1279.970] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 1279.970] (II) Module dri2: vendor=“X.Org Foundation”
[ 1279.970] compiled for 1.8.0, module version = 1.2.0
[ 1279.970] ABI class: X.Org Server Extension, version 3.0
[ 1279.970] (II) Loading extension DRI2
[ 1279.970] (II) LoadModule: “nvidia”
[ 1279.970] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 1279.970] (II) Module nvidia: vendor=“NVIDIA Corporation”
[ 1279.970] compiled for 4.0.2, module version = 1.0.0
[ 1279.970] Module class: X.Org Video Driver
[ 1279.970] (II) NVIDIA dlloader X Driver 195.36.24 Thu Apr 22 19:18:54 PDT 2010
[ 1279.970] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1279.970] (++) using VT number 1

[ 1279.971] (II) Primary Device is: PCI 01@00:00:0
[ 1279.971] (II) Loading sub module “fb”
[ 1279.971] (II) LoadModule: “fb”
[ 1279.971] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 1279.971] (II) Module fb: vendor=“X.Org Foundation”
[ 1279.971] compiled for 1.8.0, module version = 1.0.0
[ 1279.971] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1279.971] (II) Loading sub module “wfb”
[ 1279.971] (II) LoadModule: “wfb”
[ 1279.971] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 1279.971] (II) Module wfb: vendor=“X.Org Foundation”
[ 1279.971] compiled for 1.8.0, module version = 1.0.0
[ 1279.971] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1279.971] (II) Loading sub module “ramdac”
[ 1279.971] (II) LoadModule: “ramdac”
[ 1279.971] (II) Module “ramdac” already built-in
[ 1279.972] () NVIDIA(0): Depth 24, (–) framebuffer bpp 32
[ 1279.972] (==) NVIDIA(0): RGB weight 888
[ 1279.972] (==) NVIDIA(0): Default visual is TrueColor
[ 1279.972] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1279.972] () NVIDIA(0): Option “TwinView” “0”
[ 1279.972] () NVIDIA(0): Option “MetaModes” “1680x1050_60 +0+0”
[ 1279.972] () NVIDIA(0): Option “TwinViewXineramaInfoOrder” “CRT-0”
[ 1279.972] () NVIDIA(0): Enabling RENDER acceleration
[ 1279.972] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 1279.972] (II) NVIDIA(0): enabled.
[ 1281.155] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[ 1281.155] (–) NVIDIA(0): Memory: 1048576 kBytes
[ 1281.155] (–) NVIDIA(0): VideoBIOS: 62.94.21.00.19
[ 1281.155] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1281.155] (–) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 1281.155] (–) NVIDIA(0): Connected display device(s) on GeForce 9600 GT at PCI:1:0:0:
[ 1281.155] (–) NVIDIA(0): Hitachi X224W D-sub (CRT-0)
[ 1281.155] (–) NVIDIA(0): Hitachi X224W D-sub (CRT-0): 400.0 MHz maximum pixel clock
[ 1281.246] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 1281.246] (II) NVIDIA(0): Validated modes:
[ 1281.246] (II) NVIDIA(0): “1680x1050_60+0+0”
[ 1281.246] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 1281.267] (–) NVIDIA(0): DPI set to (90, 91); computed from “UseEdidDpi” X config
[ 1281.267] (–) NVIDIA(0): option
[ 1281.267] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 1281.267] (–) Depth 24 pixmap format is 32 bpp
[ 1281.267] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 1281.268] (II) NVIDIA(0): Initialized GPU GART.
[ 1281.274] (II) NVIDIA(0): Setting mode “1680x1050_60+0+0”
[ 1281.310] (II) Loading extension NV-GLX
[ 1281.337] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 1281.343] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1281.343] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 1281.343] (==) NVIDIA(0): Backing store disabled
[ 1281.343] (==) NVIDIA(0): Silken mouse enabled
[ 1281.343] (==) NVIDIA(0): DPMS enabled
[ 1281.343] (II) Loading extension NV-CONTROL
[ 1281.343] (II) Loading extension XINERAMA
[ 1281.343] (II) Loading sub module “dri2”
[ 1281.343] (II) LoadModule: “dri2”
[ 1281.344] (II) Reloading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 1281.344] (II) NVIDIA(0): [DRI2] Setup complete
[ 1281.344] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1281.344] (==) RandR enabled
[ 1281.344] (II) Initializing built-in extension Generic Event Extension
[ 1281.344] (II) Initializing built-in extension SHAPE
[ 1281.344] (II) Initializing built-in extension MIT-SHM
[ 1281.344] (II) Initializing built-in extension XInputExtension
[ 1281.344] (II) Initializing built-in extension XTEST
[ 1281.344] (II) Initializing built-in extension BIG-REQUESTS
[ 1281.344] (II) Initializing built-in extension SYNC
[ 1281.344] (II) Initializing built-in extension XKEYBOARD
[ 1281.344] (II) Initializing built-in extension XC-MISC
[ 1281.344] (II) Initializing built-in extension XINERAMA
[ 1281.344] (II) Initializing built-in extension XFIXES
[ 1281.344] (II) Initializing built-in extension RENDER
[ 1281.344] (II) Initializing built-in extension RANDR
[ 1281.344] (II) Initializing built-in extension COMPOSITE
[ 1281.344] (II) Initializing built-in extension DAMAGE
[ 1281.344] (II) SELinux: Disabled on system
[ 1281.345] (II) Initializing extension GLX
[ 1281.386] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1281.386] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 1281.386] () Power Button: Applying InputClass “system-setup-keyboard”
[ 1281.386] (II) LoadModule: “evdev”
[ 1281.386] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1281.386] (II) Module evdev: vendor=“X.Org Foundation”
[ 1281.386] compiled for 1.7.99.901, module version = 2.4.0
[ 1281.386] Module class: X.Org XInput Driver
[ 1281.386] ABI class: X.Org XInput driver, version 9.0
[ 1281.387] () Power Button: always reports core events
[ 1281.387] () Power Button: Device: “/dev/input/event1”
[ 1281.398] (II) Power Button: Found keys
[ 1281.398] (II) Power Button: Configuring as keyboard
[ 1281.398] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD)
[ 1281.398] () Option “xkb_rules” “evdev”
[ 1281.398] () Option “xkb_model” “pc105”
[ 1281.398] () Option “xkb_layout” “cz,us”
[ 1281.398] () Option “xkb_variant” “qwerty”
[ 1281.398] () Option “xkb_options” “terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll”
[ 1281.423] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1281.423] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 1281.423] () Power Button: Applying InputClass “system-setup-keyboard”
[ 1281.423] () Power Button: always reports core events
[ 1281.423] () Power Button: Device: “/dev/input/event0”
[ 1281.428] (II) Power Button: Found keys
[ 1281.428] (II) Power Button: Configuring as keyboard
[ 1281.428] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD)
[ 1281.428] () Option “xkb_rules” “evdev”
[ 1281.428] () Option “xkb_model” “pc105”
[ 1281.428] () Option “xkb_layout” “cz,us”
[ 1281.428] () Option “xkb_variant” “qwerty”
[ 1281.428] () Option “xkb_options” “terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll”
[ 1281.432] (II) config/udev: Adding input device Logitech Logitech Cordless RumblePad 2 (/dev/input/event4)
[ 1281.432] (EE) No input driver/identifier specified (ignoring)
[ 1281.432] (II) config/udev: Adding input device Logitech Logitech Cordless RumblePad 2 (/dev/input/js0)
[ 1281.432] (EE) No input driver/identifier specified (ignoring)
[ 1281.435] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 1281.435] () AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
[ 1281.435] () AT Translated Set 2 keyboard: Applying InputClass “system-setup-keyboard”
[ 1281.435] () AT Translated Set 2 keyboard: always reports core events
[ 1281.435] () AT Translated Set 2 keyboard: Device: “/dev/input/event3”
[ 1281.440] (II) AT Translated Set 2 keyboard: Found keys
[ 1281.440] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 1281.440] (II) XINPUT: Adding extended input device “AT Translated Set 2 keyboard” (type: KEYBOARD)
[ 1281.440] () Option “xkb_rules” “evdev”
[ 1281.440] () Option “xkb_model” “pc105”
[ 1281.440] () Option “xkb_layout” “cz,us”
[ 1281.440] () Option “xkb_variant” “qwerty”
[ 1281.440] () Option “xkb_options” “terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll”
[ 1281.440] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 1281.440] () ImPS/2 Generic Wheel Mouse: Applying InputClass “evdev pointer catchall”
[ 1281.440] () ImPS/2 Generic Wheel Mouse: always reports core events
[ 1281.440] () ImPS/2 Generic Wheel Mouse: Device: “/dev/input/event5”
[ 1281.451] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 1281.451] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 1281.451] (II) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 1281.451] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 1281.451] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 1281.451] () ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 1281.451] () ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1281.451] (II) XINPUT: Adding extended input device “ImPS/2 Generic Wheel Mouse” (type: MOUSE)
[ 1281.451] () ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 1281.451] () ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 1281.451] () ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 1281.451] () ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 1281.451] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 1281.451] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 1281.451] (EE) No input driver/identifier specified (ignoring)
[ 1281.455] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
[ 1281.455] () Macintosh mouse button emulation: Applying InputClass “evdev pointer catchall”
[ 1281.455] () Macintosh mouse button emulation: always reports core events
[ 1281.455] () Macintosh mouse button emulation: Device: “/dev/input/event2”
[ 1281.463] (II) Macintosh mouse button emulation: Found 3 mouse buttons
[ 1281.463] (II) Macintosh mouse button emulation: Found relative axes
[ 1281.463] (II) Macintosh mouse button emulation: Found x and y relative axes
[ 1281.463] (II) Macintosh mouse button emulation: Configuring as mouse
[ 1281.463] () Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
[ 1281.463] () Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1281.463] (II) XINPUT: Adding extended input device “Macintosh mouse button emulation” (type: MOUSE)
[ 1281.463] () Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
[ 1281.463] () Macintosh mouse button emulation: (accel) acceleration profile 0
[ 1281.463] () Macintosh mouse button emulation: (accel) acceleration factor: 2.000
[ 1281.463] () Macintosh mouse button emulation: (accel) acceleration threshold: 4
[ 1281.463] (II) Macintosh mouse button emulation: initialized for relative axes.
[ 1281.463] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
[ 1281.463] (EE) No input driver/identifier specified (ignoring)
[ 1352.435] (II) Power Button: Close
[ 1352.435] (II) UnloadModule: “evdev”
[ 1352.439] (II) Power Button: Close
[ 1352.439] (II) UnloadModule: “evdev”
[ 1352.442] (II) AT Translated Set 2 keyboard: Close
[ 1352.442] (II) UnloadModule: “evdev”
[ 1352.458] (II) ImPS/2 Generic Wheel Mouse: Close
[ 1352.458] (II) UnloadModule: “evdev”
[ 1352.468] (II) Macintosh mouse button emulation: Close
[ 1352.468] (II) UnloadModule: “evdev”

5

konec messages:
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: (eth0): IP6 addrconf timed out or failed.
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) scheduled…
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) started…
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled…
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) started…
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: (eth0): device state change: 7 -> 8 (reason 0)
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: Policy set ‘System eth0’ (eth0) as default for IPv4 routing and DNS.
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: Activation (eth0) successful, device activated.
Jun 2 18:56:11 Core2Quad NetworkManager[1165]: Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
Jun 2 18:56:14 Core2Quad rtkit-daemon[1844]: Sucessfully made thread 1838 of process 1838 (/usr/bin/pulseaudio) owned by ‘500’ high priority at nice level -11.
Jun 2 18:56:15 Core2Quad kernel: fuse init (API version 7.13)
Jun 2 18:56:15 Core2Quad setroubleshoot: SELinux not enabled, setroubleshootd exiting…
Jun 2 18:56:16 Core2Quad rtkit-daemon[1844]: Sucessfully made thread 2099 of process 1838 (/usr/bin/pulseaudio) owned by ‘500’ RT at priority 5.
Jun 2 18:56:16 Core2Quad rtkit-daemon[1844]: Sucessfully made thread 2101 of process 2101 (/usr/bin/pulseaudio) owned by ‘500’ high priority at nice level -11.
Jun 2 18:56:16 Core2Quad pulseaudio[2101]: pid.c: Daemon already running.
Jun 2 18:56:16 Core2Quad rtkit-daemon[1844]: Sucessfully made thread 2103 of process 2103 (/usr/bin/pulseaudio) owned by ‘500’ high priority at nice level -11.
Jun 2 18:56:16 Core2Quad pulseaudio[2103]: pid.c: Daemon already running.
Jun 2 18:59:09 Core2Quad ntpd[1327]: 0.0.0.0 c614 04 freq_mode
Jun 2 18:59:53 Core2Quad kernel: NVRM: Xid (0001:00): 6, PE0001
Jun 2 19:00:00 Core2Quad kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Jun 2 19:00:00 Core2Quad kernel: usb 1-5: New USB device found, idVendor=0951, idProduct=1603
Jun 2 19:00:00 Core2Quad kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 2 19:00:00 Core2Quad kernel: usb 1-5: Product: DataTraveler 2.0
Jun 2 19:00:00 Core2Quad kernel: usb 1-5: Manufacturer: Kingston
Jun 2 19:00:00 Core2Quad kernel: usb 1-5: SerialNumber: 000000000000000000000020
Jun 2 19:00:00 Core2Quad kernel: Initializing USB Mass Storage driver…
Jun 2 19:00:00 Core2Quad kernel: scsi6 : usb-storage 1-5:1.0
Jun 2 19:00:00 Core2Quad kernel: usbcore: registered new interface driver usb-storage
Jun 2 19:00:00 Core2Quad kernel: USB Mass Storage support registered.
Jun 2 19:00:05 Core2Quad kernel: scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
Jun 2 19:00:05 Core2Quad kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Jun 2 19:00:05 Core2Quad kernel: sd 6:0:0:0: [sdb] 1986560 512-byte logical blocks: (1.01 GB/970 MiB)
Jun 2 19:00:05 Core2Quad kernel: sd 6:0:0:0: [sdb] Write Protect is off
Jun 2 19:00:05 Core2Quad kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 2 19:00:05 Core2Quad kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 2 19:00:05 Core2Quad kernel: sdb: sdb1
Jun 2 19:00:05 Core2Quad kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 2 19:00:05 Core2Quad kernel: sd 6:0:0:0: [sdb] Attached SCSI removable disk
Jun 2 19:00:37 Core2Quad init: tty (/dev/tty2) main process ended, respawning
Jun 2 19:00:39 Core2Quad acpid: client 1404[0:0] has disconnected
Jun 2 19:00:39 Core2Quad acpid: client connected from 1404[0:0]
Jun 2 19:00:39 Core2Quad acpid: 1 client rule loaded
Jun 2 19:00:39 Core2Quad kernel: usb 1-5: USB disconnect, address 2
Jun 2 19:04:36 Core2Quad kernel: npviewer.bin[2459]: segfault at 13 ip 00000000016d0e87 sp 00000000ff9e8184 error 4 in libflashplayer.so[ff4000+994000]
Jun 2 19:04:38 Core2Quad abrt[2514]: saved core dump of pid 2459 (/usr/lib/nspluginwrapper/npviewer.bin) to /var/cache/abrt/ccpp-1275498276-2459.new/coredump (100376576 bytes)
Jun 2 19:04:38 Core2Quad abrtd: Directory ‘ccpp-1275498276-2459’ creation detected
Jun 2 19:04:38 Core2Quad abrtd: Blacklisted package ‘nspluginwrapper’
Jun 2 19:04:38 Core2Quad abrtd: Corrupted or bad crash /var/cache/abrt/ccpp-1275498276-2459 (res:2), deleting
Jun 2 19:07:14 Core2Quad kernel: usb 1-5: new high speed USB device using ehci_hcd and address 3
Jun 2 19:07:14 Core2Quad kernel: usb 1-5: New USB device found, idVendor=0951, idProduct=1625
Jun 2 19:07:14 Core2Quad kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 2 19:07:14 Core2Quad kernel: usb 1-5: Product: DT 101 II
Jun 2 19:07:14 Core2Quad kernel: usb 1-5: Manufacturer: Kingston
Jun 2 19:07:14 Core2Quad kernel: usb 1-5: SerialNumber: 00400539BC5BF990A75D0B60
Jun 2 19:07:14 Core2Quad kernel: scsi7 : usb-storage 1-5:1.0
Jun 2 19:07:19 Core2Quad kernel: scsi 7:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
Jun 2 19:07:19 Core2Quad kernel: sd 7:0:0:0: Attached scsi generic sg2 type 0
Jun 2 19:07:19 Core2Quad kernel: sd 7:0:0:0: [sdb] 31252024 512-byte logical blocks: (16.0 GB/14.9 GiB)
Jun 2 19:07:19 Core2Quad kernel: sd 7:0:0:0: [sdb] Write Protect is off
Jun 2 19:07:19 Core2Quad kernel: sd 7:0:0:0: [sdb] Assuming drive cache: write through
Jun 2 19:07:19 Core2Quad kernel: sd 7:0:0:0: [sdb] Assuming drive cache: write through
Jun 2 19:07:19 Core2Quad kernel: sdb: sdb1
Jun 2 19:07:19 Core2Quad kernel: sd 7:0:0:0: [sdb] Assuming drive cache: write through
Jun 2 19:07:19 Core2Quad kernel: sd 7:0:0:0: [sdb] Attached SCSI removable disk
Jun 2 19:07:25 Core2Quad ntfs-3g[2646]: Version 2010.3.6 integrated FUSE 27
Jun 2 19:07:25 Core2Quad ntfs-3g[2646]: Mounted /dev/sdb1 (Read-Write, label “Carry”, NTFS 3.1)
Jun 2 19:07:25 Core2Quad ntfs-3g[2646]: Cmdline options: rw
Jun 2 19:07:25 Core2Quad ntfs-3g[2646]: Mount options: rw,silent,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096
Jun 2 19:07:25 Core2Quad ntfs-3g[2646]: Ownership and permissions disabled, configuration type 1
Jun 2 19:12:38 Core2Quad acpid: client 1404[0:0] has disconnected
Jun 2 19:12:38 Core2Quad acpid: client connected from 1404[0:0]
Jun 2 19:12:38 Core2Quad acpid: 1 client rule loaded
Jun 2 19:13:51 Core2Quad acpid: client 1404[0:0] has disconnected
Jun 2 19:13:51 Core2Quad acpid: client connected from 1404[0:0]
Jun 2 19:13:51 Core2Quad acpid: 1 client rule loaded
Jun 2 19:15:36 Core2Quad ntfs-3g[2646]: Unmounting /dev/sdb1 (Carry)
Jun 2 19:15:38 Core2Quad kernel: usb 1-5: USB disconnect, address 3
Jun 2 19:15:48 Core2Quad init: tty (/dev/tty2) main process ended, respawning
Jun 2 19:15:49 Core2Quad acpid: client 1404[0:0] has disconnected
Jun 2 19:15:49 Core2Quad acpid: client connected from 1404[0:0]
Jun 2 19:15:49 Core2Quad acpid: 1 client rule loaded
Jun 2 19:15:59 Core2Quad acpid: client 1404[0:0] has disconnected
Jun 2 19:15:59 Core2Quad acpid: client connected from 2845[0:0]
Jun 2 19:15:59 Core2Quad acpid: 1 client rule loaded
Jun 2 19:16:27 Core2Quad pulseaudio[3392]: pid.c: Daemon already running.
Jun 2 19:16:27 Core2Quad setroubleshoot: SELinux not enabled, setroubleshootd exiting…
Jun 2 19:16:58 Core2Quad acpid: client 2845[0:0] has disconnected
Jun 2 19:16:58 Core2Quad acpid: client connected from 3536[0:0]
Jun 2 19:16:58 Core2Quad acpid: 1 client rule loaded
Jun 2 19:17:08 Core2Quad pulseaudio[3807]: pid.c: Daemon already running.
Jun 2 19:17:08 Core2Quad pulseaudio[3812]: pid.c: Daemon already running.
Jun 2 19:17:08 Core2Quad pulseaudio[3132]: module.c: Module “module-device-manager” should be loaded once at most. Refusing to load.
Jun 2 19:17:08 Core2Quad setroubleshoot: SELinux not enabled, setroubleshootd exiting…
Jun 2 19:18:11 Core2Quad acpid: client 3536[0:0] has disconnected
Jun 2 19:18:11 Core2Quad acpid: client connected from 4168[0:0]
Jun 2 19:18:11 Core2Quad acpid: 1 client rule loaded
Jun 2 19:18:22 Core2Quad rtkit-daemon[1844]: Sucessfully made thread 4435 of process 4435 (/usr/bin/pulseaudio) owned by ‘500’ high priority at nice level -11.
Jun 2 19:18:22 Core2Quad rtkit-daemon[1844]: Sucessfully made thread 4464 of process 4435 (/usr/bin/pulseaudio) owned by ‘500’ RT at priority 5.
Jun 2 19:18:22 Core2Quad setroubleshoot: SELinux not enabled, setroubleshootd exiting…
Jun 2 19:18:22 Core2Quad rtkit-daemon[1844]: Sucessfully made thread 4540 of process 4540 (/usr/bin/pulseaudio) owned by ‘500’ high priority at nice level -11.
Jun 2 19:18:22 Core2Quad pulseaudio[4540]: pid.c: Daemon already running.
Jun 2 19:18:22 Core2Quad rtkit-daemon[1844]: Sucessfully made thread 4550 of process 4550 (/usr/bin/pulseaudio) owned by ‘500’ high priority at nice level -11.
Jun 2 19:18:22 Core2Quad pulseaudio[4550]: pid.c: Daemon already running.
Jun 2 19:18:46 Core2Quad ntpd[1327]: 0.0.0.0 0612 02 freq_set kernel -17.694 PPM
Jun 2 19:18:46 Core2Quad ntpd[1327]: 0.0.0.0 0615 05 clock_sync
Jun 2 19:18:57 Core2Quad gnome-keyring-daemon[4785]: couldn’t set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jun 2 19:19:07 Core2Quad gnome-keyring-daemon[4785]: PROMPT INPUT:#012#012[prompt]#012title=Heslo nové klíčenky#012primary=Zvolte heslo pro novou klíčenku#012secondary=Nějaká aplikace chce vytvořit novou klíčenku nazvanou ‘Výchozí’. Zvolite heslo, které pro ni chcete používat.#012window-id=#012#012[visibility]#012password_area=true#012confirm_area=true#012#012[transport]#012public=CB74D53640BCC557AF35C99F961F23872062481EE9C9AB1FE44F097C04AE239BE826881792FADEB1568CF412885CBBD592D32069A1489442A92BC931497D5B38E5A402144821C1EB5EEDA2C773EB8598E1EFDF190725042851B2D32FC3B2FC9A6C937FD422ADC3F5E5E9FE0312FDB087A60596F5751807DDB2B118565B5FB708DE70AD217EA80144D177E94B045122A2F516F6945F01E7A7D5145155A126FBB08BE43547707380134AA3C5AD88E968D28D5EC7E0B591D78DF3B99015F5BADF58#012prime=FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7EDEE386BFB5A899FA5AE9F24117C4B1FE649286651ECE45B3DC2007CB8A163BF0598DA48361C55D39A69163FA8FD24CF5F83655D23DCA3AD961C62F356208552BB9ED529077096966D670C354E4ABC9804F1746C08CA237327FFFFFFFFFFFFFFFF#012base=02#012
Jun 2 19:19:10 Core2Quad gnome-keyring-daemon[4785]: PROMPT OUTPUT:#012#012[transport]#012public=3DB54CC6FE8472D801FBF6DF27D95592D6D9DA770E035E3EFCC5A5C6CA8ACF479684980A91509F595B73138D4E93D028A1F3560CC532067F17809454C060D7BFB9B98E4E4555E4E256BD18D0D13747A11C5C133B4DE2F80D098557D196D2F26C4B24CF8D728C37198914A43BE9DB6207619D4DB1090CB199CE8321F33137C49D0D9D029AA318C08EAA8610484B8C744F54AFD7A7F320E4B78DEB219D2B83E8D2AE1CB375F914AC5F223B4E42B2CBCE822AAD7187E5A5C959B51E971A8629AB67#012#012[password]#012parameter=664F9EFA70452C36CADA98D7CC34B841#012value=9C3ADEA05E98A1880749600E5AC5E08C#012#012[confirm]#012parameter=9D705A7A6DDBBA75F3DA567CD6AA1985#012value=B7A2DB92ABADC6AB1AF470FE8BFAB96A#012#012[unlock-options]#012unlock-auto=false#012unlock-timeout=0#012unlock-idle=0#012#012[details]#012expanded=false#012#012[prompt]#012response=ok#012
Jun 2 19:21:12 Core2Quad kernel: mame[4897]: segfault at 40 ip 0000000000b00a11 sp 00007fffd11a5f60 error 4 in mame[400000+293b000]
Jun 2 19:21:15 Core2Quad abrt[4901]: saved core dump of pid 4897 (/usr/bin/mame) to /var/cache/abrt/ccpp-1275499272-4897.new/coredump (177049600 bytes)
Jun 2 19:21:15 Core2Quad abrtd: Directory ‘ccpp-1275499272-4897’ creation detected
Jun 2 19:21:16 Core2Quad abrtd: Package ‘mame’ isn’t signed with proper key
Jun 2 19:21:16 Core2Quad abrtd: Corrupted or bad crash /var/cache/abrt/ccpp-1275499272-4897 (res:5), deleting
Jun 2 19:21:18 Core2Quad kernel: NVRM: Xid (0001:00): 6, PE0001
Jun 2 19:21:37 Core2Quad kernel: NVRM: Xid (0001:00): 54, CMDre 00000001 00000810 ffffffff 00000004 00000084
Jun 2 19:21:37 Core2Quad kernel: NVRM: Xid (0001:00): 54, CMDre 00000001 00000000 00000000 00000001 00000001
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: snd_pcm_avail() navrátil hodnotu, která je nezvykle vysoká: 1116108 bajtů (2109 ms).
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: S největší pravděpodobností se jedná o chybu v ovladači ALSA “snd_cmipci”. Nahlaste prosím tento problém vývojářům ALSA.
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: snd_pcm_dump():
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: Hooks PCM
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: Its setup is:
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: stream : PLAYBACK
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: access : MMAP_INTERLEAVED
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: format : S16_LE
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: subformat : STD
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: channels : 6
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: rate : 44100
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: exact rate : 44100 (44100/1)
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: msbits : 16
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: buffer_size : 5461
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_size : 2730
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_time : 61904
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: tstamp_mode : ENABLE
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_step : 1
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: avail_min : 5109
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_event : 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: start_threshold : -1
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: stop_threshold : 6148539391267569664
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: silence_threshold: 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: silence_size : 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: boundary : 6148539391267569664
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: Slave: Hardware PCM card 0 ‘C-Media CMI8738’ device 1 subdevice 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: Its setup is:
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: stream : PLAYBACK
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: access : MMAP_INTERLEAVED
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: format : S16_LE
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: subformat : STD
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: channels : 6
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: rate : 44100
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: exact rate : 44100 (44100/1)
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: msbits : 16
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: buffer_size : 5461
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_size : 2730
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_time : 61904
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: tstamp_mode : ENABLE
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_step : 1
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: avail_min : 5109
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_event : 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: start_threshold : -1
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: stop_threshold : 6148539391267569664
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: silence_threshold: 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: silence_size : 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: boundary : 6148539391267569664
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: appl_ptr : 2032293
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: hw_ptr : 2119841
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: snd_pcm_delay() navrátil hodnotu, která je nezvykle vysoká: -967380 bajtů (-1828 ms).
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: S největší pravděpodobností se jedná o chybu v ovladači ALSA “snd_cmipci”. Nahlaste prosím tento problém vývojářům ALSA.
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: snd_pcm_dump():
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: Hooks PCM
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: Its setup is:
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: stream : PLAYBACK
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: access : MMAP_INTERLEAVED
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: format : S16_LE
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: subformat : STD
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: channels : 6
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: rate : 44100
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: exact rate : 44100 (44100/1)
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: msbits : 16
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: buffer_size : 5461
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_size : 2730
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_time : 61904
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: tstamp_mode : ENABLE
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_step : 1
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: avail_min : 5109
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_event : 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: start_threshold : -1
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: stop_threshold : 6148539391267569664
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: silence_threshold: 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: silence_size : 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: boundary : 6148539391267569664
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: Slave: Hardware PCM card 0 ‘C-Media CMI8738’ device 1 subdevice 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: Its setup is:
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: stream : PLAYBACK
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: access : MMAP_INTERLEAVED
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: format : S16_LE
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: subformat : STD
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: channels : 6
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: rate : 44100
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: exact rate : 44100 (44100/1)
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: msbits : 16
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: buffer_size : 5461
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_size : 2730
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_time : 61904
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: tstamp_mode : ENABLE
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_step : 1
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: avail_min : 5109
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: period_event : 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: start_threshold : -1
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: stop_threshold : 6148539391267569664
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: silence_threshold: 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: silence_size : 0
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: boundary : 6148539391267569664
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: appl_ptr : 2039343
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: hw_ptr : 2119958
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-sink.c: ALSA nás probudila z důvodu zápisu nových dat na zařízení, ale ve skutečnosti nebylo co zapisovat.
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-sink.c: S největší pravděpodobností se jedná o chybu v ovladači ALSA “snd_cmipci”. Nahlaste prosím tento problém vývojářům ALSA.
Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-sink.c: Probudilo nás nastavení POLLOUT - nicméně následné snd_pcm_avail() vrátilo 0 či jinou hodnotu < min_avail.
Jun 2 19:21:52 Core2Quad pulseaudio[4435]: ratelimit.c: 15 events suppressed
Jun 2 19:21:58 Core2Quad pulseaudio[4435]: ratelimit.c: 1 events suppressed

6

toto zamrznutí nastalo po spuštění romsetu v emulátoru mame asi po 10ti vteřinách běhu
pokud to pomůže můžu sem dát i logy po chybách v gfceu (tam jsou taky časté)

7

Nevsiml jsem si, ze bych psal abys to sem kopiroval cele, ale to zajimave. V prvnich dvou nic neni, ve /var/log/messages uz neco malo

  1. pada ti flash. Proc to nevim…
    Jun 2 19:04:36 Core2Quad kernel: npviewer.bin[2459]: segfault at 13 ip 00000000016d0e87 sp 00000000ff9e8184 error 4 in libflashplayer.so[ff4000+994000]
    Jun 2 19:04:38 Core2Quad abrt[2514]: saved core dump of pid 2459 (/usr/lib/nspluginwrapper/npviewer.bin) to /var/cache/abrt/ccpp-1275498276-2459.new/coredump (100376576 bytes)
    Jun 2 19:04:38 Core2Quad abrtd: Directory ‘ccpp-1275498276-2459’ creation detected
    Jun 2 19:04:38 Core2Quad abrtd: Blacklisted package ‘nspluginwrapper’
    Jun 2 19:04:38 Core2Quad abrtd: Corrupted or bad crash /var/cache/abrt/ccpp-1275498276-2459 (res:2), deleting

  2. pada ti mame, ovsem opet netusim proc. Kazdopadne to vypada ze balik neni podepsany. Z jakeho repozitare pochazi?
    Jun 2 19:21:12 Core2Quad kernel: mame[4897]: segfault at 40 ip 0000000000b00a11 sp 00007fffd11a5f60 error 4 in mame[400000+293b000]
    Jun 2 19:21:15 Core2Quad abrt[4901]: saved core dump of pid 4897 (/usr/bin/mame) to /var/cache/abrt/ccpp-1275499272-4897.new/coredump (177049600 bytes)
    Jun 2 19:21:15 Core2Quad abrtd: Directory ‘ccpp-1275499272-4897’ creation detected
    Jun 2 19:21:16 Core2Quad abrtd: Package ‘mame’ isn’t signed with proper key
    Jun 2 19:21:16 Core2Quad abrtd: Corrupted or bad crash /var/cache/abrt/ccpp-1275499272-4897 (res:5), deleting

  3. Je nejaky problem se zvukovkou.
    Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: snd_pcm_avail() navrátil hodnotu, která je nezvykle vysoká: 1116108 bajtů (2109 ms).
    Jun 2 19:21:42 Core2Quad pulseaudio[4435]: alsa-util.c: S největší pravděpodobností se jedná o chybu v ovladači ALSA “snd_cmipci”. Nahlaste prosím tento problém vývojářům ALSA.

8

flash je přes wrapper (mám 64b systém a flash-plugin je 32b) ale problémy s flashem jsem nezaznamenal nikde žádné

mame je myslím z rpmfusion (nezapamatoval jsem si to při instalaci a nevím jak to dodatečně zjistit)
instaloval jsem ho yum install -y sdlmame a nainstalovalo to pouze jeden balíček a to “mame” , většinou spadne a dnes se dokonce rozsypal obraz na čárky

zvukovka: používám na všechno pulseaudio a dělá to chybu jen po přihlášení do X , vypíše že Audio nefunguje a “vracím se k Surround 5.1” a všechno všude hraje,

takže teda nikdo mi neporadí a nezbávý než se vrátit zpět do windows :frowning:

9

Odkud máš balíček zjistíš přes yum info, ale pokud se chceš vrátit k Windows (a říkám to nerad), tak raději běž. GNU/Linux není náhražka Windows, ale alternativa a pokud ti způsobuje jen problémy a žádnou přidanou hodnotu a výhodu, jako třeba mě a jiným, co jej používají, tak asi opravdu nemá cenu, aby si se trápil. Kup si za pár tisíc Windows a užívej si (a nezapomeň, že k OEM licenci také nemáš technickou podporu), nedělej si problémy zbytečně. Doporučuji přečíst moc hezký článek http://www.linuxexpres.cz/analyza-nekolik-padnych-duvodu-proc-pouzivat-gnu-linux snad ti pomůže a objasní situaci.

A nezapomínej, že covex a spol ti tady radí zdarma ve svém volném čase a oháněním se s “výhrůžkou”, že se vrátíš k Windows není moc dobrý nápad - mě to třeba vyloženě nadzvedává, když to někdo řekne.

10

Flash player mas teda asi spatne. Existuje (sice beta) ale 64b verze. Odkaz a instalace je v nasi prirucce. Co se mame tyce, je zvlastni ze by balik byl z rpmfusion ovsem nepodepsany… neni to vylouceno ze podepsany neni, ale ja ho podepsany mam.

Ignorovani chybovych hlasek bez jejich pochopeni je typicka vlastnost uzivatele windows, ktery je zvykli, ze s tim stejne nemuze nic delat. V Linuxu s tim neco delat jde vzdy. Prvni vec je zadat jejih opis aspon do google.

11

O 64b flashi vím a nikdy mi ještě nic nespadlo ani nezamrzlo při přehrávání flash videa takže nemám důvod s tím něco dělat. Je mi jedno jestli mám windowsovou vlastnost. Za těch 15 let bych asi měl mít. Prostě to nechám tak dokud mi někdy něco nespadne a mame :

mame jak jsem z logu zjistil vypíše tu hlášku o chybě a že není podepsané pokaždé když se ukončuje. Na funkci to nemá vliv.

Už mi to funguje. Parametry jádra jsem zadal do grub.conf nomodeset noapic a ještě acpi=off a už to nemrzne, sice se počítač už neumí sám od sebe vypnout ale hlavně že to už nemrzne.

díky za rady hlavně za tu že mám přejít do windows to mi fakt málem pomohlo nejvíc
stačilo hledat v googlu víc a kdo hledá najde

co mně tak trápí je třeba to že evolution mi nějak neukládá heslo a pokaždé ho vyptává znova i když mám zatrhlé zapamatovat heslo a ještě otravuje s klíčenkou anebo to že když nastartuje X tak phonon rozpozná zvukovku jako nefunkční a automaticky přejde k 5.1 surround ale hlavně že to posílá maily a hlavně že to hraje 5.1 a nemrzne !!

12

Tak si nakonfiguruj tu otravnou klicenku a uz ti to hesla ukladat bude… a ne jen v evolution.

13

Když vyplním heslo pro klíčenku nebo ho potvrdím jako prázdné tak to při dalším spuštění chce heslo znova a všude.
Nevěděl jsem že jsou tam nějaké klíčenky které by se daly někde konfigurovat. Všiml jsem si toho jenom v evolution jinak nikde.

14

yum install seahorse
drive se to jmenoval gnome-keyring-manager… Aplikace/Prislusenstvi/Hesla a sifrovaci klice
Po restartu systemu by to melo chtit uz jen to hlavni heslo.

15

Tak jsem nainstaloval ten seahorse a nijak mi to nepomohlo. V nabídce klíčů evolution klíčenku nevidím a evolution nadále vyžaduje heslo k mailu a pak ještě heslo pro nově vytvářenou klíčenku “výchozí” kterou ovšem nevytvoří a místo toho ji to pokaždé žádá znovu zadat k vytvoření.

16

k tej zvukovke cmpci (zrejme najcastejsie model CMI8738) - bol tam nejaky problem v alse (nieco s citanim bufferu, proste po istom case sa zvuk zastavil), v F13 uz je to OK.

mrzne F13 aj mne (a myslim, ze aj F12 to bolo podobne), no vysledoval som, ze najcastejsie je to pri zapnutom Firefoxe a nacitavani nejakej stranky. pri samotnom prezerani nacitaneho webu to nezamrzlo nikdy. epiphany, opera OK, QT prehliadace OK. mam 32 bit.

17

Jiva2 napsal(a):

Tak jsem nainstaloval ten seahorse a nijak mi to
nepomohlo. V nabídce klíčů evolution
klíčenku nevidím a evolution nadále vyžaduje
heslo k mailu a pak ještě heslo pro nově
vytvářenou klíčenku “výchozí” kterou ovšem
nevytvoří a místo toho ji to pokaždé žádá
znovu zadat k vytvoření.

Vypada to holt, ze je v tom nejaky neporadek. V prvni rade si nainstaluj jeste seahorse-plugins.

Potom je dulezite zjistit jestli dialog, ktery na tebe vyskakuje je od hesla k mailu nebo od gpg (pokud ho pouzivas) - pinentry vs. seahorse.