IEEE 802.1x

Dobry den,
k DHCP serveru se pripojuji s overovanim pomoc IEEE 802.1x.
Nove jsem nainstaloval FC6 a bohuzel pripojeni s novym
wpa_supplicantem 0.4.9 krachuje (stejne s xsupplicantem) tak, ze
na serveru probehne autorizace OK, ale muj pocitac potom
nejak odmitne pridelenou adresu. V logu spravce je tedy vse OK.
Ve FC5 fungovalo vse skvele.

ifup eth0 … skonci s OK
ale pak je tento stav:

eth0 Link encap:Ethernet HWadr 00:11:2F:15:28:4D
inet adr:10.5.10.156 V.íesm…r:10.5.15.255
Maska:255.255.248.0
inet6-adr: fe80::211:2fff:fe15:284d/64 Rozsah:Linka

Jeste pripojim log wpa_supplicantu:

[STATE] Reinit state machine
[STATE] [backend_sm] REQUEST -> INITIALIZE
[STATE] [backend_sm] INITIALIZE -> IDLE
[STATE] [backend_sm] UNKNOWN -> INITIALIZE
[STATE] [backend_sm] INITIALIZE -> IDLE
[INT] Initializing socket for interface eth0…
[INT] Allmulti mode is already enabled on this device!
[INT] Interface eth0 is NOT wireless!
[CONFIG] Registered event handler ‘rtnetlink handler’ in slot 0, with socket 5.
[INT] Setting Linkmode to 1.
Couldn’t get encryption capabilites!
[INT] Interface has no encryption capabilities, or unknown abilitites.
[INT] Interface initialized!
[CONFIG] Working from config file ./xsupplicant.conf.
No configuration information for network “(null)” found. Using default.
[CONFIG] Registered event handler ‘frame handler’ in slot 9, with socket 4.
[INT] Opened socket descriptor #6
[CONFIG] Registered event handler ‘IPC master socket’ in slot 8, with socket 6.
[INT] Interface eth0 is NOT wireless!
[CONFIG] Socket 4 (frame handler) had an event!
[ALL] Got Frame (60) :
000 | 01 80 c2 00 00 03 00 0a f4 89 1a 10 88 8e 01 00 | …
010 | 00 05 01 01 00 05 01 00 00 00 00 00 00 00 00 00 | …
020 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | …
030 | 00 00 00 00 00 00 00 00 00 00 00 00 | …
[ALL] Got EAP-Request-Identification.
[ALL] Clock tick! authWhile=29 heldWhile=59 startWhen=0 curState=DISCONNECTED
[STATE] Changing from DISCONNECTED to DISCONNECTED.
[STATE] Changing from DISCONNECTED to CONNECTING.
[STATE] Changing from CONNECTING to RESTART.
[STATE] (global) -> INITIALIZE
[STATE] [backend_sm] IDLE -> INITIALIZE
[STATE] [backend_sm] INITIALIZE -> IDLE
[STATE] Supplicant PAE has issued a restart.
[CONFIG] Socket 4 (frame handler) had an event!
[ALL] Got Frame (60) :
000 | 01 80 c2 00 00 03 00 0a f4 89 1a 10 88 8e 01 00 | …
010 | 00 04 03 01 00 04 00 00 00 00 00 00 00 00 00 00 | …
020 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | …
030 | 00 00 00 00 00 00 00 00 00 00 00 00 | …
[ALL] Got EAP-Success!
Invalid activemethod after success packet recv!
[ALL] Clock tick! authWhile=28 heldWhile=58 startWhen=0 curState=RESTART
[STATE] Changing from RESTART to AUTHENTICATING.
[STATE] [backend_sm] IDLE -> REQUEST
[ALL] Got EAP-Success!
Invalid activemethod after success packet recv!
[STATE] [backend_sm] REQUEST -> SUCCESS
[STATE] [backend_sm] SUCCESS -> IDLE
[ALL] Called global_deinit()
[ALL] Shutting down IPC socket!
[INT] Closing socket descriptor #6
[AUTH TYPE] There was no active method in eap_cleanup()!
[ALL] Doing statemachine cleanup!
[STATE] Reinit state machine
[STATE] [backend_sm] IDLE -> INITIALIZE
[STATE] [backend_sm] INITIALIZE -> IDLE
[AUTH TYPE] There was no active method in eap_cleanup()!
[INT] Sending Logoff for int eth0!
[STATE] Sending EAPOL-Logoff Frame.
[INT] Padding frame to 64 bytes by adding 46 byte(s).
[ALL] Frame to be sent (64) :
000 | 01 80 c2 00 00 03 00 11 2f 15 28 4d 88 8e 01 02 | …/.(M…
010 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | …
020 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | …
030 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | …
[ALL] Cleaning up interface eth0…
[INT] Called cardif_linux_rtnetlink_cleanup()!
[INT] Setting Linkmode to 0.
[CONFIG] Cleaning up SSID structs.
[CONFIG] Deinit wireless SM
[CONFIG] Clean up timers
[CONFIG] Clean up event core
[CONFIG] Clearing handler ‘rtnetlink handler’.
[CONFIG] Clearing handler ‘IPC master socket’.
[CONFIG] Clearing handler ‘frame handler’.
[CONFIG] Free up config
[CONFIG] Free memory used to parse config
[CONFIG] Clean up log file
[CONFIG] Clean up config path.
[CONFIG] Clean up OpenSSL error strings
[CONFIG] Clean up OpenSSL library data
[CONFIG] Clean up pid file

Solved